Looking for some parts: request - ZR-1 Net Registry Forums

Meanmyz · 10-11-2012

Hi Guys,

I am looking for a couple of things:

a. Spring Clamp 47mm: this is the upper radiator hose clamp onto the radiator. It is a silver clamp stamped "47" (part #21030894)

Our local Napa has a GM parts connection and after waiting a week to get it, I received a screw clamp...and a rather flimsy looking one at that. I can't believe that GM doesn't have it.

b. the two throttle cable clips for the cable on top of the plenum (it's the later style, maybe 92', for sure '93 to '95). (and I need one of the two screws) I would like nice original finish pieces with the correct OEM black oxide screw.

If the spring clamp is not perfect, that's ok, I can paint it - as long as it hasn't lost it's tension.

If anyone has these, I would like to get them ASAP. It's getting colder up here in MN and I want to get my '95 "yellow bird" back on the road to play before I have to put her away. The clamp is the hold up at this point and I don't want to mark up the new hose with a screw clamp or have to pull it off later to get the spring clamp on

.

I do appreciate any help. Thanks!

10-11-2012	#1
Meanmyz Join Date: Feb 2006 Location: Springfield, Minnesota Posts: 444	Looking for some parts: request Hi Guys, I am looking for a couple of things: a. Spring Clamp 47mm: this is the upper radiator hose clamp onto the radiator. It is a silver clamp stamped "47" (part #21030894) Our local Napa has a GM parts connection and after waiting a week to get it, I received a screw clamp...and a rather flimsy looking one at that. I can't believe that GM doesn't have it. b. the two throttle cable clips for the cable on top of the plenum (it's the later style, maybe 92', for sure '93 to '95). (and I need one of the two screws) I would like nice original finish pieces with the correct OEM black oxide screw. If the spring clamp is not perfect, that's ok, I can paint it - as long as it hasn't lost it's tension. If anyone has these, I would like to get them ASAP. It's getting colder up here in MN and I want to get my '95 "yellow bird" back on the road to play before I have to put her away. The clamp is the hold up at this point and I don't want to mark up the new hose with a screw clamp or have to pull it off later to get the spring clamp on. I do appreciate any help. Thanks! Last edited by Meanmyz; 10-12-2012 at 10:08 AM. Reason: fixed wrong use of words (spring vs screw clamp)