ZR-1 Net Registry Forums - View Single Post

TheLurker · 01-28-2006

The hot tip about cleaned stock injectors is that they tend to stick a bit after cleaning and sitting a while. The best way do do it is to install them and run the car the same day. Before installing them, bang them on something. When I have injectors on the test bench and they stick I just take a small hammer, like a tack hammer, and tap on them. That usually does the trick. So, taking that information a step further, just tap them around right before installing them. Then, get gas on them as soon as possible. You should be fine after that.

01-28-2006	#35
TheLurker Join Date: Sep 2005 Location: Dallas, Texas Posts: 14	Re: Update on injectors The hot tip about cleaned stock injectors is that they tend to stick a bit after cleaning and sitting a while. The best way do do it is to install them and run the car the same day. Before installing them, bang them on something. When I have injectors on the test bench and they stick I just take a small hammer, like a tack hammer, and tap on them. That usually does the trick. So, taking that information a step further, just tap them around right before installing them. Then, get gas on them as soon as possible. You should be fine after that.