ZR-1 Net Registry Forums - View Single Post

Z51JEFF · 02-10-2021

Take the stock offset and as an inch, No need to make it difficult with all the different numbers. I've been having custom wheels made for years,made to my specs and I always take a stock wheel,find out how much room I have on the inside of the wheel well and go from there. I've never had a wheel made that added anything to the outside of the wheel. I know the language here is as basic as it gets but it doesn't need to be complicated. One small area on the inside of the rear we'll wheel liner will need to be trimmed.

02-10-2021	#4
Z51JEFF Join Date: Dec 2007 Location: Fremont, CA Posts: 3,087	Re: Correct Offset for 18x12? Take the stock offset and as an inch, No need to make it difficult with all the different numbers. I've been having custom wheels made for years,made to my specs and I always take a stock wheel,find out how much room I have on the inside of the wheel well and go from there. I've never had a wheel made that added anything to the outside of the wheel. I know the language here is as basic as it gets but it doesn't need to be complicated. One small area on the inside of the rear we'll wheel liner will need to be trimmed.