Re: INFL Rest Bolt Problem
Quote:
Originally Posted by Chris26
Tried to remove the bolts only to have one of them strip into the frame....
should i just cut the bolt head off with a dremel.....I don't want to shake up that
sensor too much.....
|
That may be your only option at this point. I believe the nuts are spot welded inside the frame. Did the bolt/nut strip or did the spot welds on the nuts break loose? If the latter, hopefully there is a frame hole close by to get a new nut inside the frame.
Rich
__________________
1990 Bright Red Coupe #608
380 Stroker, Ported Heads/Intake/Housings/TB
Haibeck Secondary Delete Chip / Pete's Cams
George Braml Intake / FIC Injectors
Coated SW Headers / Corsa
Bill Boudreau B/B ZF6 / Viper 4.10 gears
Ron Davis Radiator
Pioneer AVIC-Z140BH NAV
Fikse FM5's 285 / 335 / C6 Brakes
WAZOO Member
|