Re: air bleed with plenum coolant bypass
Quote:
Originally Posted by -=Jeff=-
Rich, that is pretty interesting for the coolant.. I assume it is working out fine.. no air pocket issues
|
It worked out great, all the air blead out fine, no air pockets. I was concerned because the installed fittings are not at the highest point in the injector housing, but no air pockets. I kept a close watch after start up checking for any hot spots.
Rich
__________________
1990 Bright Red Coupe #608
380 Stroker, Ported Heads/Intake/Housings/TB
Haibeck Secondary Delete Chip / Pete's Cams
George Braml Intake / FIC Injectors
Coated SW Headers / Corsa
Bill Boudreau B/B ZF6 / Viper 4.10 gears
Ron Davis Radiator
Pioneer AVIC-Z140BH NAV
Fikse FM5's 285 / 335 / C6 Brakes
WAZOO Member
Last edited by Scrrem; 08-15-2012 at 09:53 AM.
|