Re: Which coil pack do you have?
MSD
|
Re: Which coil pack do you have?
I had originally changed out my OE coils for Jegs coils when I did my injector replacement. Subsequently I changed out the Jegs coils, after 3 yrs, for GM coils. The GM coils have been in there for about 32k miles and seem to be just fine. I didn't see any evident difference between the two brands by looking at my plugs, AC 41-602's, which I change every year.
The reason for going back to the GM coils was that they are specifically for an LT5, or so GM says; where the Jegs coils had other applications besides an LT5. I figure the environment in the valley of an LT5, for the coils, is fairly harsh temperature wise.:dontknow: :cheers: Tom |
Re: Which coil pack do you have?
Working on a Z now that has Screamin Demon coils and nology wires (really different looking wires).
Daniel |
Re: Which coil pack do you have?
Quote:
|
Re: Which coil pack do you have?
Quote:
|
Re: Which coil pack do you have?
I've had the same set of MSD coils and wires for the last 3+ years. Also used MSD coil and wires on my 84 HEI system together w the MSD 6A box.
The 6A finally died after 10 years. |
Re: Which coil pack do you have?
A very timely question for me. A month ago I installed 4 new MSD coils and got 8 misfiring plugs. A switch back to OE Delco works fine. The MSD were made in.....China (No!!!!). Advice to myself: dont swap for the sake of 'not having to go under there again' (you will regardless and get used to it) and if you have a problem with coils, use OE parts.
|
Re: Which coil pack do you have?
Quote:
Daniel |
Re: Which coil pack do you have?
Quote:
:cheers: Tom |
Re: Which coil pack do you have?
Quote:
http://imageshack.us/a/img339/5063/engineg.jpg Nology Hot Wires http://imageshack.us/a/img841/1607/hotwireexplod.gif |
All times are GMT -4. The time now is 03:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025