R.I.P Crane Cams - ZR-1 Net Registry Forums

FU · 02-26-2009

In this week's news . More to come. What a shame.

http://www.news-journalonline.com/Ne...rane022409.htm

XfireZ51 · 02-26-2009

Amazing how deeply this "recession" is reaching. I watched Drag Racing on
ESPN and saw teams with no sponsorship and they were big names with no money. Never would have thought.

Z Factor · 02-27-2009

I had a crane cam in my first hotrod, a 1973 Z28 with an LT1 in it from a Corvette. That car really moved and was a head turner. The Crane cam and lifters were quality products and stood up to repeated flogging. It is sad to see them go under.

GOLDCYLON · 02-27-2009

Sad news

flyin ryan · 02-27-2009

On one hand i'm sorry to see them go but on the other hand things have been getting worse from them for a while, especially since Mikronite bought them. i haven't used stuff from them for a good while now.

rhipsher · 02-27-2009

That news really saddens me. I installed one of their cams and a set of lifters 12 years ago in my 68 mustang. Just a great product.Time for a moment of silence.

IowaZR-1 · 03-01-2009

http://www.autoweek.com/article/2009...NEWS/902279984

"Well-known cam shafts company Crane Cams shut down Feb. 24 for restructuring but says it plans to reopen, likely sometime in March.

All of the companyâ€™s 280 workers were laid off, though about 25 remain to work on military contracts."

making race cams for

flyin ryan · 03-01-2009

Crane's not the only one...Hedman Headers have enough stock for 90 days so they told the workers to go home, for a while. MSD is not far away from chapter 11, also. Both Crane & MSD were bought out a few short years ago...

flyin ryan · 03-11-2009

Not sure how many of you have heard this but Crane 'IS' going to re-open in the next couple-few weeks from what my sources tell me.

flyin ryan · 03-27-2009

For the past couple days it looked like Scopion Performane was steping up to the plate & was going to take over/buy out what's left of Crane but as of today Liqui Tec Industries has been hired to liquidate the assest of Crane Cams...on again...off again

02-26-2009	#1
FU Join Date: Mar 2004 Location: Found Member Posts: 4,346	R.I.P Crane Cams In this week's news . More to come. What a shame. http://www.news-journalonline.com/Ne...rane022409.htm __________________ Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237

02-26-2009	#2
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,710	Re: R.I.P Crane Cams Amazing how deeply this "recession" is reaching. I watched Drag Racing on ESPN and saw teams with no sponsorship and they were big names with no money. Never would have thought.

02-27-2009	#3
Z Factor Join Date: Dec 2003 Location: S. Florida Posts: 2,667	Re: R.I.P Crane Cams I had a crane cam in my first hotrod, a 1973 Z28 with an LT1 in it from a Corvette. That car really moved and was a head turner. The Crane cam and lifters were quality products and stood up to repeated flogging. It is sad to see them go under.

02-27-2009	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: R.I.P Crane Cams Sad news __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

02-27-2009	#5
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,741	Re: R.I.P Crane Cams On one hand i'm sorry to see them go but on the other hand things have been getting worse from them for a while, especially since Mikronite bought them. i haven't used stuff from them for a good while now. __________________ There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.

02-27-2009	#6
rhipsher Join Date: Aug 2008 Location: Houston 90 Red ZR-1 Posts: 2,320	Re: R.I.P Crane Cams That news really saddens me. I installed one of their cams and a set of lifters 12 years ago in my 68 mustang. Just a great product.Time for a moment of silence.

03-01-2009	#7
IowaZR-1 Join Date: Feb 2006 Location: Iowa aka "one big cornfield" Posts: 341	Re: R.I.P Crane Cams http://www.autoweek.com/article/2009...NEWS/902279984 "Well-known cam shafts company Crane Cams shut down Feb. 24 for restructuring but says it plans to reopen, likely sometime in March. All of the companyâ€™s 280 workers were laid off, though about 25 remain to work on military contracts." making race cams for Last edited by IowaZR-1; 03-01-2009 at 05:42 PM.

03-01-2009	#8
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,741	Re: R.I.P Crane Cams Crane's not the only one...Hedman Headers have enough stock for 90 days so they told the workers to go home, for a while. MSD is not far away from chapter 11, also. Both Crane & MSD were bought out a few short years ago... __________________ There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.

03-11-2009	#9
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,741	Re: R.I.P Crane Cams Not sure how many of you have heard this but Crane 'IS' going to re-open in the next couple-few weeks from what my sources tell me. __________________ There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.

03-27-2009	#10
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,741	Re: R.I.P Crane Cams For the past couple days it looked like Scopion Performane was steping up to the plate & was going to take over/buy out what's left of Crane but as of today Liqui Tec Industries has been hired to liquidate the assest of Crane Cams...on again...off again __________________ There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.