Corvette and ZR1 emblems for rear of car

[jrd1990zr1]

I am not sure if this or parts wanted is the correct place for this posting. Does anyone know if the 1990 emblems (CORVETTE and ZR1) are available or who might have them? I believe the outlines are color coded, looking for gray.

Thanks in advance,

Originally Posted by jrd1990zr1

looking for gray.

Thanks in advance,

Charcoal Metallic?

[tccrab]

Originally Posted by jrd1990zr1

I am not sure if this or parts wanted is the correct place for this posting. Does anyone know if the 1990 emblems (CORVETTE and ZR1) are available or who might have them? I believe the outlines are color coded, looking for gray.

Thanks in advance,

As you probably already know, these are long gone from the GM inventory.
ZIP has a few, but none in Charcoal Metallic:
http://www.zip-products.com/Zip/prod...1385FA77662A38
Ecklers has some too, but again, not in Charcoal Metallic:
http://www.ecklers.com/product.asp?p...1&dept_id=1455
Kurt White (Limey) has a few:
http://www.whiteracingproducts.com/i..._description=1

Good luck in your search!!

TomC
"Crabs"

[Hammer]

Try Vintage Parts. They buy a lot of low inventory items from various manufacturers. They have the ZR-1 emblems, but not the Corvette emblems. They carry a load of discontinued stuff, so always check with them before getting hosed elsewhere.

http://www.vpartsinc.com/advanced_se...&submit=submit

[Aurora40]

FYI, '84-90 "CORVETTE" emblems are the same as on the 1990 Z. So you could use the emblem off a regular charcoal 'vette.

[jrd1990zr1]

Originally Posted by Jeffvette

Charcoal Metallic?

Yes Thanks

[jrd1990zr1]

Originally Posted by Aurora40

FYI, '84-90 "CORVETTE" emblems are the same as on the 1990 Z. So you could use the emblem off a regular charcoal 'vette.

Bob,

Do you happen to know the GM part # ???

Thanks, John

[Hammer]

Originally Posted by jrd1990zr1

Bob,

Do you happen to know the GM part # ???

Thanks, John

You're welcome. If you haven't clicked on the link, do so. The GM number for the ZR-1 emblem is entered already. They don't have the CORVETTE emblem so the other catalogs will have to be looked at for one. GM Part # is 10172314.

When (if you haven't already) you join the Registry, in the members area, you can download a parts catalog for our cars. It has been a tremendous help to me.

[Hammer]

Originally Posted by Hammer

You're welcome. If you haven't clicked on the link, do so. The GM number for the ZR-1 emblem is entered already. They don't have the CORVETTE emblem so the other catalogs will have to be looked at for one. GM Part # is 10172314.

When (if you haven't already) you join the Registry, in the members area, you can download a parts catalog for our cars. It has been a tremendous help to me.

Sorry, the catalog shows the 10172314 CORVETTE emblem is for a '91. Looks like the number you need is 14058697, it's shown as black w/ silver border. The other one...for a '91 shows as smoke gray.

[blackjack]

i was under the impression the corvette script was longer on the zr-1,to compensate the wider rear end...somebody knows about that??
bj
91/1735