B&B is on! (pics) - ZR-1 Net Registry Forums

32valvZ · 04-03-2008

It sounds sweet at idle.....waiting for my speed sensor, then I can drive it!

Paul Workman · 04-03-2008

What did you do about the missing hanger tabs? (Or, do I have you confused w/ someone else's B&B installation that was sans the spring hanger tabs?)

P.

32valvZ · 04-03-2008

Quote:

Originally Posted by Paul Workman

What did you do about the missing hanger tabs? (Or, do I have you confused w/ someone else's B&B installation that was sans the spring hanger tabs?)

P.

Turned out I couldnt see them in the pics. When they arrived all 4 were in place.

XfireZ51 · 04-03-2008

32valve,

You'd like the B&Bs better with headers in front of them.

I see we have another paisano on the forum.
FORZA AZZURRI!

Paul Workman · 04-03-2008

Quote:

Originally Posted by 32valvZ

Turned out I couldnt see them in the pics. When they arrived all 4 were in place.

Very nice! I've decided to go w/ the B&B too, after hearing Pete's. His has a siamesed "x" pipe followed by small bullet resonators instead of the standard B&B resonator setup. If it were not for the fact that the mufflers are not sold separately, I might just have my local custom exhaust guy built it. But, I gotta say, your installation really looks superb!!

P.

GOLDCYLON · 04-03-2008

Clean install!

DMark · 04-03-2008

Where did you get that lift?

That might be the answer to my low ceiling issue in my garage.

Zr1 Destroyer · 04-03-2008

Looks good.....time for some headers man!!!!

bobbyhi · 04-03-2008

Quote:

Originally Posted by DMark

Where did you get that lift?

That might be the answer to my low ceiling issue in my garage.

It's a Kwiklift. I'm thinking of getting one. Maybe if enough interest we could do a "group buy" Anyone else interested???

Kwiklift.com is the link...........

bobbyhi · 04-03-2008

Nice job on the install. Looks fantastic=D>

04-03-2008	#1
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,063	B&B is on! (pics) It sounds sweet at idle.....waiting for my speed sensor, then I can drive it! __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]

04-03-2008	#2
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,491	Re: B&B is on! (pics) What did you do about the missing hanger tabs? (Or, do I have you confused w/ someone else's B&B installation that was sans the spring hanger tabs?) P.

04-03-2008	#4
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,706	Re: B&B is on! (pics) 32valve, You'd like the B&Bs better with headers in front of them. I see we have another paisano on the forum. FORZA AZZURRI!

04-03-2008	#6
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,147	Re: B&B is on! (pics) Clean install! __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

04-03-2008	#7
DMark Join Date: Oct 2004 Location: Tennessee Posts: 197	Re: B&B is on! (pics) Where did you get that lift? That might be the answer to my low ceiling issue in my garage. __________________ [IMG]http://i16.tinypic.com/4ig0b3a.jpg[/IMG] D. Mark Gentleman Farmer, U.S. Army-Retired LS3,LS6,LT1,LT5,L98,L82,L36,L79,L76

04-03-2008	#8
Zr1 Destroyer Join Date: Oct 2005 Location: Candy Apple...yUmMy Posts: 1,137	Re: B&B is on! (pics) Looks good.....time for some headers man!!!!

04-03-2008	#10
bobbyhi Join Date: Jul 2005 Location: Mendota Heights, MN. 55120 Posts: 984	Re: B&B is on! (pics) Nice job on the install. Looks fantastic=D> __________________ Bob Anderson 1990 #2405 White/Gray Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported Minnesota State Director Founding Member #19