FS: billet camshafts - ZR-1 Net Registry Forums

tpepmeie · 10-05-2022

I have two additional sets of billet tool steel camshaft cores. Normally these go for $2400 semi-finished, and $1500 to finish to any custom spec.

I will offer these at $2000/ set for the semi-finished cores, or $3600 for two sets.

Contact me for custom lobe profiles and finish grinding.

Thanks,
Todd

Would also trade a finished set of custom cams for a 93-95 shortblock.

efnfast · 10-05-2022

Todd, you come up with the coolest stuff.

GOLDCYLON · 10-06-2022

You would not happen to have any ARP cam bolts laying around would ya ?

tpepmeie · 10-27-2022

Down to my last set of cores. 2000 for the cores. Can be finished to custom specs.

Sent from my iPhone using ZR-1 Net Registry

10-05-2022	#1
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 813	FS: billet camshafts I have two additional sets of billet tool steel camshaft cores. Normally these go for $2400 semi-finished, and $1500 to finish to any custom spec. I will offer these at $2000/ set for the semi-finished cores, or $3600 for two sets. Contact me for custom lobe profiles and finish grinding. Thanks, Todd Would also trade a finished set of custom cams for a 93-95 shortblock. __________________ Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development

10-05-2022	#2
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,534	Re: FS: billet camshafts Todd, you come up with the coolest stuff.

10-06-2022	#3
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,151	Re: FS: billet camshafts You would not happen to have any ARP cam bolts laying around would ya ? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 10-07-2022 at 10:04 PM.

10-27-2022	#4
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 813	Re: FS: billet camshafts Down to my last set of cores. 2000 for the cores. Can be finished to custom specs. Sent from my iPhone using ZR-1 Net Registry __________________ Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development