Didn't make BG, but fun none-the-less... - ZR-1 Net Registry Forums

Schrade · 05-17-2014

Didn't make BG for that fun this year, but did get up with Fletch (user fletchusmc), to do some lagers and grub on Wed, then uncork some lead at the range on Thursday morning, with one of his girls.

Fletch's '95 is IMMACULATE. I didn't see a FLECK of corner jam in the dash or console, the door jambs were absolutely spotless, then at the range, he popped the hood. I saw nothing that would stop one from thinking he was looking at a new Z.

He unloaded once on the way TO the range, and I saw no oil, and no Black / fuel. His mill has a great burn...

We had the range to ourselves for most of the morning. 'Sure Shot', just outside MCAS Cherry Point NC.

Fletch with his daughter - she's on a 30.30 I believe, and it's obvious that it wasn't HER first day either. Not all the lead went through the same hole on the paper, but they were almost all TOUCHING, making it 'one big hole'. Great shooting. I had my notebook out

, and Fletch DEFINITELY should have had HIS notebook out

Schrade · 05-17-2014

THis is Fletch on my Dad's .30 Carbine, that he carried in the early days of Viet Nam (got a snappic from a book with him + this rifle in the jungle, somewhere on the boards here)

Fletch spotting her on the same .30 Carbine (and she did NOT need a spot, except to get a good zero ! )

Schrade · 05-17-2014

Some of the hardware (Dad's issue .30 is 2nd from bottom):

Me on a Rock-Ola .30 Carbine (this one has a 3 muzzle wear, and still is a tack driver):

Schrade · 05-17-2014

Fletch's daughter on a new M1A / 7.62mm that I got last year (Black composite stock replaced with some beautiful OEM USGI woodwork, armorer's stamps and rack number to boot

):

And some fresh grub on the hoof, a couple doors down back at the beachhouse (can you say 'veal tenderloin' ???

)

fletchusmc · 05-17-2014

URL=http://s1342.photobucket.com/user/fletchusmc/media/Mobile%20Uploads/IMG_58497833391057_zps6tw9chut.jpeg.html]

[/URL]

Have to thank Chuck for a great time! Definitely headed up his way soon to check out his Z. Few more photos to add here. This 30-30 was my Dad's. He got it in 1976 and prior to Thursday it had less than 2 boxes of ammo put through it. Once Kaylee started dinging that metal disk at 200 yards I just gave her the ammo and told her to have at it. Prior to Thursday the only rifle she had fired was a 22.

We Gone · 05-18-2014

Great pics, Always love a range day!

GOLDCYLON · 06-06-2014

Awesome!!! Range days are always fun. Just had my AK-47s Bolt and receiver all polished. Cant wait to see it in action with the Drum !!!!

Im zombie ready

RyanChappel · 06-06-2014

16.5 inch barrel, flat top, 7:1 twist, hammer forged barrel, bullpup configuration, plan to work the trigger down to 4.5lbs weight..

Is your dad's old VN weapon an SKS or varient, shooting 7.62x39?

They weren't that easy to take home, as I remember.

Schrade · 06-06-2014

Quote:

Originally Posted by RyanChappel

16.5 inch barrel, flat top, 7:1 twist, hammer forged barrel, bullpup configuration, plan to work the trigger down to 4.5lbs weight..

Is your dad's old VN weapon an SKS or varient, shooting 7.62x39?

They weren't that easy to take home, as I remember.

It's a .30 Carbine RC. Green Beret in early VN days were issued M2's, and M2A1's (paratrooper stock) - the select-fire version of WWII M1 Carbine. Lightweight and select fire made them favored over M14 MG and Thompson SMG.

Dad was career GB officer / unit commander, unit commander , unit XO ,(same thing John Wayne did in the movie) ; didn't have to declare 'Combat Loss', of issued weapon.

He's far left in this snappic, with the Carbine. This was an hour before he was hit in the foot. Color photo in hardback shows clearly. As a youngster, I always asked him if he got any bad guys. He once said he thought he'd gotten 4 (VC) once...

05-17-2014	#1
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Didn't make BG, but fun none-the-less... Didn't make BG for that fun this year, but did get up with Fletch (user fletchusmc), to do some lagers and grub on Wed, then uncork some lead at the range on Thursday morning, with one of his girls. Fletch's '95 is IMMACULATE. I didn't see a FLECK of corner jam in the dash or console, the door jambs were absolutely spotless, then at the range, he popped the hood. I saw nothing that would stop one from thinking he was looking at a new Z. He unloaded once on the way TO the range, and I saw no oil, and no Black / fuel. His mill has a great burn... We had the range to ourselves for most of the morning. 'Sure Shot', just outside MCAS Cherry Point NC. Fletch with his daughter - she's on a 30.30 I believe, and it's obvious that it wasn't HER first day either. Not all the lead went through the same hole on the paper, but they were almost all TOUCHING, making it 'one big hole'. Great shooting. I had my notebook out , and Fletch DEFINITELY should have had HIS notebook out __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

05-17-2014	#2
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: Didn't make BG, but fun none-the-less... THis is Fletch on my Dad's .30 Carbine, that he carried in the early days of Viet Nam (got a snappic from a book with him + this rifle in the jungle, somewhere on the boards here) Fletch spotting her on the same .30 Carbine (and she did NOT need a spot, except to get a good zero ! ) __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

05-17-2014	#3
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: Didn't make BG, but fun none-the-less... Some of the hardware (Dad's issue .30 is 2nd from bottom): Me on a Rock-Ola .30 Carbine (this one has a 3 muzzle wear, and still is a tack driver): __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

05-17-2014	#4
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: Didn't make BG, but fun none-the-less... Fletch's daughter on a new M1A / 7.62mm that I got last year (Black composite stock replaced with some beautiful OEM USGI woodwork, armorer's stamps and rack number to boot ): And some fresh grub on the hoof, a couple doors down back at the beachhouse (can you say 'veal tenderloin' ??? ) __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

05-17-2014	#5
fletchusmc Join Date: Nov 2013 Location: Jacksonville, NC Posts: 48	Re: Didn't make BG, but fun none-the-less... URL=http://s1342.photobucket.com/user/fletchusmc/media/Mobile%20Uploads/IMG_58497833391057_zps6tw9chut.jpeg.html][/URL]Have to thank Chuck for a great time! Definitely headed up his way soon to check out his Z. Few more photos to add here. This 30-30 was my Dad's. He got it in 1976 and prior to Thursday it had less than 2 boxes of ammo put through it. Once Kaylee started dinging that metal disk at 200 yards I just gave her the ammo and told her to have at it. Prior to Thursday the only rifle she had fired was a 22.

05-18-2014	#6
We Gone Join Date: Apr 2004 Location: ATL. GA. Posts: 2,170	Re: Didn't make BG, but fun none-the-less... Great pics, Always love a range day! __________________ Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold

06-06-2014	#7
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Didn't make BG, but fun none-the-less... Awesome!!! Range days are always fun. Just had my AK-47s Bolt and receiver all polished. Cant wait to see it in action with the Drum !!!! Im zombie ready __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

06-06-2014	#8
RyanChappel Join Date: Aug 2012 Location: Boone County, Indiana Posts: 132	Re: Picking up my new IDI .223 Tavor this weekend.. 16.5 inch barrel, flat top, 7:1 twist, hammer forged barrel, bullpup configuration, plan to work the trigger down to 4.5lbs weight.. Is your dad's old VN weapon an SKS or varient, shooting 7.62x39? They weren't that easy to take home, as I remember.