|
10-22-2010
|
#1 |
 
Join Date: Aug 2005
Location: Pa
Posts: 114
|
WTB ported Plenum and Injector Housings
Looking to do a winter project, I want to paint the top end so I am looking for a ported Plenum and Injector Housings Perfer 90 to 92, as I have new injectors for the 90 to 92. should they be 36MM?
needing powerdercoat or paint is ok. Thanks Bill 
|
|
|
|
10-22-2010
|
#2 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
|
Re: WTB ported Plenum and Injector Housings
I think Dom has a plenum and inj housings to sell
http://www.zr1.net/forum/showthread.php?t=12878 You could get them posted and Pced and save yourself a little downtime.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 10-22-2010 at 05:09 PM. |
|
|
|
|
10-22-2010
|
#3 |
|
Join Date: Jun 2010
Location: Lone Pine, CA
Posts: 591
|
Re: WTB ported Plenum and Injector Housings
lgaff on this site ports and i believe he has a set allready done. you might ck with him
|
|
|
|
 |
|
|
Linear Mode
