|
09-11-2010
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
IH Bolt in head
Any suggestions on removal, a cobalt drill bit hardly scratches the surface.....will probably leave it to the machine ship.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
09-11-2010
|
#2 |
 
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,404
|
Re: IH Bolt in head
You have the darndest luck Lee. Go figure......
Sorry 'bout that!
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
09-11-2010
|
#3 |
  
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,899
|
Re: IH Bolt in head
If the head is off, I'd let them put it on a Bridgeport and drill it out and remove it.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
09-11-2010
|
#4 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
Re: IH Bolt in head
This is the head I bought from 8upZR1, nothing of my doing, I am not sure how in the hell he got that in there like that.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
09-11-2010
|
#5 |
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,763
|
Re: IH Bolt in head
well I could talk all day about doing it but I think you might be better off taking it to them and getting it done. I had to do it to a camshaft once.
I tired to get it out and failed so I took it to my local machinist good old dude and he got it out, and it was a new ARP bolt snaped in a LT5 cam.
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
09-12-2010
|
#6 |
 
Join Date: Aug 2008
Location: Houston, TX
Posts: 2,314
|
Re: IH Bolt in head
If you cannot find a local shop that wants to mess with it just send it to me and I'll slapp it on the Bridgeport and do it for free just because I like you Lee. Hahaha! A carbide endmill will go through that cobalt drill no problem.
|
|
|
|
|
09-12-2010
|
#7 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
Re: IH Bolt in head
Thanks for the offer, I am going to take it over to a shop and have it taken out.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
09-12-2010
|
#8 | |
Join Date: Jun 2004
Location: Texas
Posts: 2,418
|
Re: IH Bolt in head
Quote:
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
|
 |
|
|
Linear Mode
