ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 02-12-2020   #11
Karl
 
Karl's Avatar
 
Join Date: May 2013
Location: Chicago
Posts: 977
Default Re: Ouch ZR-1 wreck

Odds are he was not paying attention and following too close.

I drive on I-55 on a regular basis and that is one bad expressway!!!

You gotta look two plus cars in traffic, especially at a decent rate of speed.

Good thing is the car looks repairable.
__________________
1993 ZR-1 #211 Yellow On Beige Beast #2
1992 ZR-1 #427 Black On Black *Sold*
1985 L98 Blue On Blue *Sold*

Last edited by Karl; 02-12-2020 at 06:24 PM.
Karl is offline   Reply With Quote
Old 02-12-2020   #12
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,376
Default Re: Ouch ZR-1 wreck

Everything needed to fix it is standard C4 stuff. Still probably going to cost $3~4000 with used parts (my WAG & I ain't no body man)
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
A26B is offline   Reply With Quote
Old 02-12-2020   #13
EvanZR1
 
EvanZR1's Avatar
 
Join Date: Nov 2010
Location: Omaha
Posts: 402
Default Re: Ouch ZR-1 wreck

Are those C6 ZR1 badges on the hood?
__________________
Evan
2023 70th C8 HTC, 94 Admiral Blue ZR-1
SOLD - 2012 Carlisle Blue Metallic ZR1 - 800HP
SOLD - Steel Blue 91 391cid ZR-1 #391
SOLD - Black 91 ZR-1
EvanZR1 is offline   Reply With Quote
Old 02-12-2020   #14
Karl
 
Karl's Avatar
 
Join Date: May 2013
Location: Chicago
Posts: 977
Default Re: Ouch ZR-1 wreck

Quote:
Originally Posted by EvanZR1 View Post
Are those C6 ZR1 badges on the hood?
Yes they are!
__________________
1993 ZR-1 #211 Yellow On Beige Beast #2
1992 ZR-1 #427 Black On Black *Sold*
1985 L98 Blue On Blue *Sold*
Karl is offline   Reply With Quote
Old 02-12-2020   #15
owwdee
 
owwdee's Avatar
 
Join Date: Dec 2015
Location: Colorado
Posts: 69
Default Ouch ZR-1 wreck

Mine was worse than this. Hope it gets fixed and put back on the road.
__________________
1991 ZR-1 #1900
Black/Black
owwdee is offline   Reply With Quote
Old 02-14-2020   #16
Z51JEFF
 
Z51JEFF's Avatar
 
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,049
Default Re: Ouch ZR-1 wreck

The A piller doesn’t looked like it got touched but the bumper peshed down is something to look into,might have just pushed it down on the mounts. That car is #638,mine is #634.
Z51JEFF is offline   Reply With Quote
Old 02-14-2020   #17
billschroeder5842
 
billschroeder5842's Avatar
 
Join Date: Nov 2016
Location: Southlake, TX
Posts: 584
Default Re: Ouch ZR-1 wreck

Of course anything is fixable. Having a recent fender bender about a year ago, I learned a lot about the process and what was involved. My Corvette specialty shop was very transparent and involved me in the repair. Mine was no where near as bad and the bill was 13K of which 11.5 was in man hours. My experience was:

1) All parts (except front bumper valence) are NOS available as standard C4
2) Frame pulling (mine required a 1/8 inch move) can me done accurately
3) doing it "right" (mine was) requires disassembly, inspection, replace/refurbish...etc of everything forward of the cowl.
4) Insurance companies will severely under value parts replacement, parts choice and use a fraction of the hours.

This car is repairable providing the A pillar is not bent to hell, but insurance will total it and do you really want a "salvage title" ZR1 in your driveway?
__________________
Bill Schroeder
Texas Proud!

1991 Corvette ZR1 #1388
2015 Challenger Scat Pack Shaker

billschroeder5842 is offline   Reply With Quote
Old 02-14-2020   #18
fred
 
fred's Avatar
 
Join Date: Aug 2004
Location: Phoenix
Posts: 59
Default Re: Ouch ZR-1 wreck

Quote:
Originally Posted by LGAFF View Post
Looks like car in front had 22+ wheels on it and it went right under...
Possibly, or many times when the car in front is braking hard, its nose will drop and the rear end come up enabling the rear car to slide under. Especially if the rearcar is wedge shaped. Either way, it saved the Z from significantly more damage. As others have said, very easy fix, and all the parts seem to be C4 generic. Whether or not it is going to be fixed is not so certain since the owner relinquished it, and it carries a salvage title.
fred is offline   Reply With Quote
Old 02-14-2020   #19
billschroeder5842
 
billschroeder5842's Avatar
 
Join Date: Nov 2016
Location: Southlake, TX
Posts: 584
Default Re: Ouch ZR-1 wreck

For perspective, here is the "fender bender", what was required for the resurrection and the final. The car came out really very well.What I learned is that the front is just designed to "hang" and absorb an impact so even a small "smoosh" and the reverberation will damage braces, brackets, mounts...etc.
Attached Images
File Type: jpg IMG_2478.jpg (161.1 KB, 31 views)
File Type: jpg IMG_2523 (1).jpg (130.3 KB, 30 views)
File Type: jpg IMG_2535.jpg (208.0 KB, 33 views)
File Type: jpg IMG_2566 (1).jpg (198.2 KB, 34 views)
__________________
Bill Schroeder
Texas Proud!

1991 Corvette ZR1 #1388
2015 Challenger Scat Pack Shaker

billschroeder5842 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:31 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020