ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 07-03-2018   #1
Norwegianmopar
 
Norwegianmopar's Avatar
 
Join Date: Mar 2018
Location: Norway
Posts: 345
Default Plugs and wires

What plugs and wires do you guys recommend on the LT5?

Sent from my SM-G955F using ZR-1 Net Registry mobile app
__________________
Roy Martin

1994 ZR-1 #112 Admiral Blue/Black
Dana 4:10
Aluminum flywheel
Corsa exhaust
Watson headers
Haibeck chip
470 HP/399 RWHP

1991 ZR-1 #400 White/Red (SOLD)
Dana 4:10
Powder coated engine
Haibeck performance chip
Borla exhaust
Norwegianmopar is offline   Reply With Quote
Old 07-03-2018   #2
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
Default Re: Plugs and wires

I use to run AC Delco Rapidfire #5 and AC Delco wires - non-logo orange color wires. A few years ago, AC Delco went to platinum tips for Rapidfire plugs. Since I could no longer find original Rapidfire plugs, I went to NGK Iridium plugs and had no issue. I still use AC Delco plug wires. Heat range - that's one of those interesting subject...
secondchance is offline   Reply With Quote
Old 07-03-2018   #3
G-Sting
 
G-Sting's Avatar
 
Join Date: Apr 2015
Location: Kentucky
Posts: 363
Default Re: Plugs and wires

I still have the original wires and plugs. But low miles. Runs great.

Jerry's Gaskets sells LT5 wire sets - new, NOS, etc.



One example...

http://www.jerrysgaskets.com/wire-se...lug-90-95-9b2/
__________________
'94 ZR1 LT5 - Dark Red Metallic
'79 L82 4-speeds of fun
'96 LT1 Borla, H-pipe, TB, CAI (Sold)
"An adventure is only an inconvenience rightly considered. An inconvenience is only an adventure wrongly considered." -- G.K. Chesterton

Last edited by G-Sting; 07-03-2018 at 08:47 PM.
G-Sting is offline   Reply With Quote
Old 07-03-2018   #4
Billy Mild
 
Join Date: Aug 2014
Location: Kansas City, MO
Posts: 838
Default Re: Plugs and wires

I have a set of used wires from my old LT5. They are all there except 1 wire was replaced an aftermarket one. I will let them go cheap.
__________________
Looking for a ZR-1
1985 Yamaha RZ350-NOT STOCK
1971 Yamaha AT1-Middle of a restoration
Billy Mild is offline   Reply With Quote
Old 07-04-2018   #5
Norwegianmopar
 
Norwegianmopar's Avatar
 
Join Date: Mar 2018
Location: Norway
Posts: 345
Default Re: Plugs and wires

Quote:
Originally Posted by G-Sting View Post
I still have the original wires and plugs. But low miles. Runs great.

Jerry's Gaskets sells LT5 wire sets - new, NOS, etc.



One example...

http://www.jerrysgaskets.com/wire-se...lug-90-95-9b2/

Thanks for the heads up. Looks like they have a lot of goodies.
__________________
Roy Martin

1994 ZR-1 #112 Admiral Blue/Black
Dana 4:10
Aluminum flywheel
Corsa exhaust
Watson headers
Haibeck chip
470 HP/399 RWHP

1991 ZR-1 #400 White/Red (SOLD)
Dana 4:10
Powder coated engine
Haibeck performance chip
Borla exhaust
Norwegianmopar is offline   Reply With Quote
Old 07-04-2018   #6
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Plugs and wires

Following Pete P's recommendation, for 11 years now I've been using the AC Delco 41-602s.

They aren't made of rare earth - just good ol copper. They work as well as the Iridium (Champion) plugs do, but I can buy 4 or 5 of the 41-602s for the cost on ONE of the exotics.
(They) won't last as long some say? Well, at ~ $2/plug vs $9-10+/plug I can afford to replace them every season. And, with the LT5. it is so easy to get to the plugs there's no need to spend big $ for plugs that last 20k+ miles (and suffer those last few k miles with dying plugs). I can put in new plugs every season or two - and also assess how each cylinder's injectors are working while I'm at it.

These plugs in the photo are some 41-602s I pulled out for inspection that have been in service for two seasons (~6k miles). They're practically like new! What do you think?

.
Attached Images
File Type: jpg AC Delco 41-602s with aprox 2800 miles.jpg (245.8 KB, 44 views)
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 07-04-2018   #7
Norwegianmopar
 
Norwegianmopar's Avatar
 
Join Date: Mar 2018
Location: Norway
Posts: 345
Default Re: Plugs and wires

This is what Marc Haibeck said:

"We use NGK TR5IX spark plugs. They come with a 1 mm gap. Don't change the 1 mm gap.

The wires almost never cause a problem. You should not replace them unless we have more evidence identifying them as a problem. If you do replace the wires, we use the AC-Delco wires for the LT5. They fit better than any other brand. I can provide a part number if necessary."
__________________
Roy Martin

1994 ZR-1 #112 Admiral Blue/Black
Dana 4:10
Aluminum flywheel
Corsa exhaust
Watson headers
Haibeck chip
470 HP/399 RWHP

1991 ZR-1 #400 White/Red (SOLD)
Dana 4:10
Powder coated engine
Haibeck performance chip
Borla exhaust
Norwegianmopar is offline   Reply With Quote
Old 07-04-2018   #8
G-Sting
 
G-Sting's Avatar
 
Join Date: Apr 2015
Location: Kentucky
Posts: 363
Default Re: Plugs and wires

Originally Posted by G-Sting
I still have the original wires and plugs. But low miles. Runs great.

Jerry's Gaskets sells LT5 wire sets - new, NOS, etc.

One example...

http://www.jerrysgaskets.com/wire-se...lug-90-95-9b2/



Quote:
Originally Posted by Norwegianmopar View Post
Thanks for the heads up. Looks like they have a lot of goodies.
You're welcome. You might know already (but maybe other new folks here don't know)... but Jerry is a member with a '94 Z -- screen name 'A26B'

All the best in your getting that Z-Viking-Longship into top fighting shape!
__________________
'94 ZR1 LT5 - Dark Red Metallic
'79 L82 4-speeds of fun
'96 LT1 Borla, H-pipe, TB, CAI (Sold)
"An adventure is only an inconvenience rightly considered. An inconvenience is only an adventure wrongly considered." -- G.K. Chesterton
G-Sting is offline   Reply With Quote
Old 07-19-2018   #9
Silverfox1
 
Join Date: May 2015
Location: West Hills CA
Posts: 26
Default Re: Plugs and wires

I have a '95 (#386) w/25k mi & what appears to be original plugs (AC 907s) which looks to be the same as 41-907 in owner's manual. Manual says gap .050" & plug I took out (#3) was just that. Car runs good & smooth, but from what I gather, plugs s/b changed. Maybe it will run even better. Easy & cheap enough.

I see reference to 41-602s. Is that same as 907? Car is not raced, just plain old spirited street driving. My inclination is to go with copper ACs, but i saw 1 reference that Haibeck recommends NGK TR5IX.

Thoughts welcome.

Thx
Silverfox1 is offline   Reply With Quote
Old 07-23-2018   #10
rkreigh
 
Join Date: Jan 2004
Location: Alex VA
Posts: 1,087
Default Re: Plugs and wires

the lt5 has a very efficient combustion chamber and the stocker stuff works great to 700 hp


I've tried all the fancy plugs and wires and stuff and like the



ngk
delco
denso


all work really well and I've dynoed the car and can say there really isn't any difference


I would recommend the delcos and change them more often as it's good to inspect the plugs


last time I pulled $6 water shot out
__________________
95 390 LPE ZR1 (505 rwhp)
LSV = Lingenfelter Super Vette
Twin Turbo 2003 Z06 (800 RWHP)
rkreigh is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020