|
10-21-2017
|
#1 |
|
Join Date: Jun 2013
Location: Toronto
Posts: 782
|
Rear Main seal replacement questions. Pics !
Just pulled my cover off with the seal. Soon first look I thought somehow the seal was faulty but it was just dried sealant/gasket maker and it wiped clean. Thoughts ? N
Have a new main seal from Jerry about to go in.. any tips or suggestions on install and/or sealant or grease type to use on the seal ? Jerry reccomended grease and that was my first thought. Tia !   Wiped clean 
|
|
|
|
10-21-2017
|
#2 |
|
Join Date: Jun 2013
Location: Toronto
Posts: 782
|
Re: Rear Main seal replacement questions. Pics !
Ok so seems the outer of the seal to housing has rtv as well. Any tips or suggestions on getting it out ? Drilled a few screws through it and it won’t budge. Don’t want to nick the housing for obvious reasons.
|
|
|
|
|
10-21-2017
|
#3 |
|
Join Date: Jan 2017
Location: US
Posts: 233
|
Re: Rear Main seal replacement questions. Pics !
Try putting small vise grips on rubber. Well holding them tap with block of wood.
Sent from my XT1585 using ZR-1 Net Registry mobile app |
|
|
|
|
10-22-2017
|
#4 | |
|
Join Date: Jun 2013
Location: Toronto
Posts: 782
|
Re: Rear Main seal replacement questions. Pics !
Quote:
Managed to get it done .. thanks for the input. I was having a tough time given I didn’t want to take any chances nicking or bending the housing or scratching up the inner surface. Now I’m just undecided as to what I should use for a lube on the seal part that contacts the crank. Any thoughts ? I have amsoil moly grease, online I see some recommending motor oil but I can’t be certain when I will finish, and marine grease etc. 
|
|
|
|
|
|
10-22-2017
|
#5 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,645
|
Re: Rear Main seal replacement questions. Pics !
Use a good molly gp grease
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
10-22-2017
|
#6 | |
|
Join Date: Jun 2013
Location: Toronto
Posts: 782
|
Re: Rear Main seal replacement questions. Pics !
Quote:
 I do have this stuff https://www.amsoil.com/shop/by-produ...grease-nlgi-2/ Sucks to be in canada. Beautiful day today spent driving around trying to find a pilot bearing puller and no luck. looks like ill have to order one and wait even longer 
|
|
|
|
|
|
10-23-2017
|
#7 | |
 Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
|
Re: Rear Main seal replacement questions. Pics !
Quote:
__________________
peace Paul ZR-1 Net Registry Member #1494 |
|
|
|
|
 |
|
|
Linear Mode
