Belt Tensioner Removal - Page 2 - ZR-1 Net Registry Forums

GOLDCYLON · 04-19-2017

Well one thing I do know Dom if you convert to dual spal fans you have a lot more room to get to the alternator and the tensioner and anything else on the front of the motor. PHil Jagdpanzer can confirm this. GC

1971 Judge · 08-11-2017

Quote:

Originally Posted by A26B

http://www.jerrysgaskets.com/pulley-...oem-90-95-4e1/

Just bought one from your site, Jerry!

A26B · 08-12-2017

Quote:

Originally Posted by 1971 Judge

Just bought one from your site, Jerry!

Got it! Thanks Wayne :-)

lfalzarano · 08-12-2017

Quote:

Originally Posted by Dynomite

See Item #8 if you want to be COOL LT5 Added Systems And with this Billet Aluminum Pulley you can easily replace just the Bearing.

This Belt Tensioner Pulley will fit the ZR-1 (LT5) as well as a standard C4 with L98 engine.

Ebay Billet Aluminum Belt Tensioner Pulley

Rather than a pipe on combination open end......just use another Combination wrench box end on the Open End.........

To get the 1/2 inch socket into the 1/2 inch square receiver of the Tensioner (for release of the serpentine belt), just lift the Tensioner a bit with broom handle and insert socket.....then compress Tensioner. Like Paul suggests....no need to remove ANYTHING to remove the Tensioner. Use a bit of Blue Loctite on Tensioner Bolt when installing and tighten just enough.....

I actually remove the Alternator Pulley when installing new belt as I have a "special Tool" to remove that alternator nut in a few seconds. Then I place the alternator pulley in the tensioner belt and install the pulley on the alternator.....DONE DEAL.

Oh.....by the way.....I invented a New Way to install the Serpentine Belt......Remove the Alternator Pulley (takes 1 minute) and position NEW Alternator Pulley inside Serpentine Belt and lift up the Alternator Pulley and Serpentine Belt with Belt Tensioner compressed (Keep Serpentine Belt aligned with Belt Tensioner Pulley). Now just slip the Alternator Pulley onto the shaft (very easy to do and plenty of play) and tighten up the 15/16 inch Alternator Pulley Nut.

All Aluminum Alternator Pulley

Dynamite... Clean that engine compartment. But great information.

Sent from my iPhone using ZR-1 Net Registry

04-19-2017	#11
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Belt Tensioner Removal Well one thing I do know Dom if you convert to dual spal fans you have a lot more room to get to the alternator and the tensioner and anything else on the front of the motor. PHil Jagdpanzer can confirm this. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V