src - ZR-1 Net Registry Forums

edram454 · 03-20-2014

will an autoxray scanner help in fixing a service suspension light? I detailed my car last week and after I drove it around the block the service suspension light lit up. I know if you started the car 3 times and did not move it will also light up but I drove it around the block and it came back on. I did not do any driving until after I detailed it. I was using mild simple green by hand and also applying a firewall and black dressing on parts of the engine bay. Nothing on the engine or plenum. this car has never thrown a code before. I read hib halversons article on the active suspension and it does not look too complicated. my two front shocks have been rebuilt by bilstein less than 1 year ago no issues. Should I get an autoxray code scanner? any thoughts.

ed ramos #3028

Paul Workman · 03-20-2014

Quote:

Originally Posted by edram454

will an autoxray scanner help in fixing a service suspension light? I detailed my car last week and after I drove it around the block the service suspension light lit up. I know if you started the car 3 times and did not move it will also light up but I drove it around the block and it came back on. I did not do any driving until after I detailed it. I was using mild simple green by hand and also applying a firewall and black dressing on parts of the engine bay. Nothing on the engine or plenum. this car has never thrown a code before. I read hib halversons article on the active suspension and it does not look too complicated. my two front shocks have been rebuilt by bilstein less than 1 year ago no issues. Should I get an autoxray code scanner? any thoughts.

ed ramos #3028

That would be a question for AutoXray's tech support. Somehow I doubt the Xray unit will troubleshoot to the shocks, but I'd call AXR first.

On another note, I spoke to a tech rep this past winter, and from what he told me, AutoXray is soon to be no more. The dude didn't seem too "with it" or anxious to help me. So, I hope he was as FOS as his answers (or lack thereof) were when I last spoke with them.

Good luck. Do let us know if yo learn anything.

P.

-=Jeff=- · 03-20-2014

SRC
Jumper plugs A-C on the ALDL port, and your SRC light will flash
F-E-D-C-B-A
G-H-J-K-L-M

12 = Start of sequence
13 = Left rear time out
14 = Right Front time out
21 = Left Front time out
22 = Right Rear time out
31 = Left Front out of position
32 = Right Front out of position
33 = Left Rear out of position
34 = Right Rear out of position

41 = Selective ride control switch short to voltage
42 = Selective ride control switch open contacts
You can have a code 42 if you leave the switch in between indented positions
43 = selective ride control switch circuit open.

23 = If you start the car more than 3 times and do not move the car this code will set. Drive 3-6 feet and the light will go out

Schrade · 03-20-2014

Did you move the Spark Plug Wires out of place?

Mis-routed wires can emit EMI - same as a nuke, and Solid State Sensors + nukes = poor playmates.

scottfab · 03-20-2014

Quote:

Originally Posted by edram454

...snip...
I know if you started the car 3 times and did not move it will also light up but I drove it around the block and it came back on.
.....snip....

ed ramos #3028

Before doing anything else I'd go for another longer drive.

mike100 · 03-20-2014

The SRC diagnostic is strictly flashing bulb counts- even the Tech1 scanner just ground the appropriate pin in the ALDL so you can observe the flashing indicator in the DIC panel.

XfireZ51 · 03-20-2014

I ran into a similar issue last year. I think that if the MALF is set several times without being reset, it will stay on indicating a fault in history. Pull the BATT. Then take it for a drive and see if the fault comes back.

edram454 · 03-20-2014

thanks to all of you. You guys are awesome with advice and intellect. I did call autoxray and the device does not read suspension codes. I will try the battery disconnect along with driving it more. I will also try grounding the appropriate pins and watch indicators. I am glad I am a member of this very special site. Thanks again.

ed ramos #3028

We Gone · 03-21-2014

Got a set of the grounding plugs years ago, works great for a quick check and on thing my scanner does not do like shocks.

http://gordonkillebrew.us/Products

edram454 · 04-12-2014

well here is the whole story about the src light coming on. This whole thing was caused by a bad velocity speed sensor (vss). It is located on the drivers side of the transmission. the part has been obsolete for over 10 years for the 1990 zr1 so getting one was very difficult. I managed to buy two of them. If your vss goes out, it will throw the src suspension lights on after 3 starts... if you drive a little you will get an engine service light and you will see that your secondaries have been killed also. My car sounded good but it felt a little down on horsepower and the idle quality was a bit rougher.

If the vss is not working, the car thinks it is not moving and the ecm gets confused when you are stepping on the gas but the car thinks its not moving.. The ecm will not throw the appropriate timing or gas so the car has a rougher idle and the idle down is impossible. I thought it might be my newly rebuilt gauge cluster but when I replaced the vss sensor today the lights reset themselves and the secondaries started to work again. What a difference!! It feels like it did when I bought it. The sensor was not to difficult to remove but it was very well stuck. It took a while but it came out. It leaked very little oil. I think the transmission was over filled anyway when we checked the fluid on the transmission. Car feels great and putting up some good power numbers.

ed ramos #3028

03-20-2014	#1
edram454 Join Date: Nov 2013 Location: .. Posts: 693	src will an autoxray scanner help in fixing a service suspension light? I detailed my car last week and after I drove it around the block the service suspension light lit up. I know if you started the car 3 times and did not move it will also light up but I drove it around the block and it came back on. I did not do any driving until after I detailed it. I was using mild simple green by hand and also applying a firewall and black dressing on parts of the engine bay. Nothing on the engine or plenum. this car has never thrown a code before. I read hib halversons article on the active suspension and it does not look too complicated. my two front shocks have been rebuilt by bilstein less than 1 year ago no issues. Should I get an autoxray code scanner? any thoughts. ed ramos #3028

03-20-2014	#4
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: src Did you move the Spark Plug Wires out of place? Mis-routed wires can emit EMI - same as a nuke, and Solid State Sensors + nukes = poor playmates. __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

03-20-2014	#6
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,802	Re: src The SRC diagnostic is strictly flashing bulb counts- even the Tech1 scanner just ground the appropriate pin in the ALDL so you can observe the flashing indicator in the DIC panel.

03-20-2014	#7
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,710	Re: src I ran into a similar issue last year. I think that if the MALF is set several times without being reset, it will stay on indicating a fault in history. Pull the BATT. Then take it for a drive and see if the fault comes back. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

03-20-2014	#8
edram454 Join Date: Nov 2013 Location: .. Posts: 693	Re: src thanks to all of you. You guys are awesome with advice and intellect. I did call autoxray and the device does not read suspension codes. I will try the battery disconnect along with driving it more. I will also try grounding the appropriate pins and watch indicators. I am glad I am a member of this very special site. Thanks again. ed ramos #3028

03-20-2014	#3
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,171	Re: src SRC Jumper plugs A-C on the ALDL port, and your SRC light will flash F-E-D-C-B-A G-H-J-K-L-M 12 = Start of sequence 13 = Left rear time out 14 = Right Front time out 21 = Left Front time out 22 = Right Rear time out 31 = Left Front out of position 32 = Right Front out of position 33 = Left Rear out of position 34 = Right Rear out of position 41 = Selective ride control switch short to voltage 42 = Selective ride control switch open contacts You can have a code 42 if you leave the switch in between indented positions 43 = selective ride control switch circuit open. 23 = If you start the car more than 3 times and do not move the car this code will set. Drive 3-6 feet and the light will go out __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

03-21-2014	#9
We Gone Join Date: Apr 2004 Location: ATL. GA. Posts: 2,170	Re: src Got a set of the grounding plugs years ago, works great for a quick check and on thing my scanner does not do like shocks. http://gordonkillebrew.us/Products __________________ Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold

04-12-2014	#10
edram454 Join Date: Nov 2013 Location: .. Posts: 693	Re: src well here is the whole story about the src light coming on. This whole thing was caused by a bad velocity speed sensor (vss). It is located on the drivers side of the transmission. the part has been obsolete for over 10 years for the 1990 zr1 so getting one was very difficult. I managed to buy two of them. If your vss goes out, it will throw the src suspension lights on after 3 starts... if you drive a little you will get an engine service light and you will see that your secondaries have been killed also. My car sounded good but it felt a little down on horsepower and the idle quality was a bit rougher. If the vss is not working, the car thinks it is not moving and the ecm gets confused when you are stepping on the gas but the car thinks its not moving.. The ecm will not throw the appropriate timing or gas so the car has a rougher idle and the idle down is impossible. I thought it might be my newly rebuilt gauge cluster but when I replaced the vss sensor today the lights reset themselves and the secondaries started to work again. What a difference!! It feels like it did when I bought it. The sensor was not to difficult to remove but it was very well stuck. It took a while but it came out. It leaked very little oil. I think the transmission was over filled anyway when we checked the fluid on the transmission. Car feels great and putting up some good power numbers. ed ramos #3028