PDA

View Full Version : O-rings


LGAFF
03-20-2009, 06:18 PM
What is the part number or alternative part for the fuel injector O-Rings.

Ccmano
03-20-2009, 07:14 PM
Give Don (KarterDon) a call, he has them. Just bought a set today. $1 apiece.

H
:cheers:

A26B
03-20-2009, 10:20 PM
What is the part number or alternative part for the fuel injector O-Rings.

17112222 Seal, Fuel Injector (o-ring) (upper @ rail) 24 req'd $10.80/set
10067600 Seal, Fuel Injector (o-ring, primary) lwr in inj hsg) 8 req'd $6.00/set

I have them.....

Jerry

Polo-1
03-20-2009, 11:23 PM
Hey Jerry do have the o-ring on the front of the crank, for the oil pump.

A26B
03-20-2009, 11:48 PM
Hey Jerry do have the o-ring on the front of the crank, for the oil pump.

Yes I do. The set contains 4 o-rings. They are show in the engine assy drawing for Oil Pump, Pan and Related Parts, as itens # 427, 443 & 444. Here's the web link for the o-ring set ...
http://jerrysgaskets.com/store/index.php?main_page=product_info&cPath=0&products_id=28

The web page shows the individual seal GM part no's, which are the same numbers I use.

Jerry

Polo-1
03-21-2009, 12:24 PM
maybe I have a old # ?

10067685

A26B
03-21-2009, 01:22 PM
maybe I have a old # ?

10067685

That PN is for the Seat, Oil Pump Seal, which is the steel "washer" the face of which is the opposing part to the carbon oil pump seal.

10135870 is the PN for the Seal, Oil Pump (o-ring) that goes on the crankshaft first, in the groove immediately in front of #1 main.

The set I sell is for all 4 o-rings related to installation of the oil pump. I have the OEM carbon seals too, sold separately.

Hope this helps. I can take a couple of photos if it helps so you can get the parts you want.

Jerry

Polo-1
03-21-2009, 01:47 PM
I just can read the fiche :redface:

A26B
03-21-2009, 01:57 PM
I just can read the fiche :redface:

The pdf source I used for PN's is not very legible, so it wouldn't surprise me at all if I had mistakes in PN's.

Let me know if I can help.