Size Matters

[billybaloneey]

A new owner here, so forgive these seemingly simple questions.

I know that the rear end body parts on the ZR-1 are bigger than the standard C4...to accommodate the wider tires.

1) are the doors a different size?
2) are the rear side light housings a different size?
3) are the brake and turn signal lenses a different size?
4) are the backup lenses and license plate assembly a different size?
5) is the rear end carpet and internal trim a different size?
6) is the "CORVETTE" script a different size?
7) within the ZR-1 line, 90-95, were there any parts that changed size/fitments from year to year? In other words will the early ZR-1 body parts fit the late model ZR-1's

Is there a list published anywhere that points out all of the differences between a ZR-1 and a standard C4...front to back? Obviously 75% or more of what's in the engine compartment is unique to the ZR-1. Other than the engine itself, what are some of the other items in the engine compartment that are ZR-1 specific?

Thanks,
Clint aka billybaloneey

[Kevin]

1: yes
2: no
3: yes
4: yes, not a different size but a different assembly
5: no
6. from the normal C4 yes
7: not that i'm aware of other then the rub strip.


the ac compressor, rad, ecm, lines, belts...
this is all as far as I know, and i could be wrong.


Jeff you out there?

[Aurora40]

For #6 and #7, the "CORVETTE" emblem is larger on the '91+ models (of which non-Z's didn't have an emblem anymore). The 1990 has the same sized emblem as all '84-90 'vettes.

[Paul Workman]

1: yes
2: no
3: yes
4: yes, not a different size but a different assembly
5: no
6. from the normal C4 yes
7: not that i'm aware of other then the rub strip.


the ac compressor, rad, ecm, lines, belts...
this is all as far as I know, and i could be wrong.


Jeff you out there?

You forgot to mention the "grin" is wider (on the ZR-1 drivers:dancing ).

P.

[-=Jeff=-]

I did not think the Brake and Turn Signal Lenses were a different size (#3)

[Paul Workman]

I did not think the Brake and Turn Signal Lenses were a different size (#3)

I never measured them to compare, but couldn't help but notice the proportion appeared to remain the same, in spite of the wider tail. So, I wondered if the ZR-1 lenses were not a tad bigger. Someday, I'll have a ruler along and satisfy/confirm what I suspected for some time.;)

P.

[-=Jeff=-]

I never measured them to compare, but couldn't help but notice the proportion appeared to remain the same, in spite of the wider tail. So, I wondered if the ZR-1 lenses were not a tad bigger. Someday, I'll have a ruler along and satisfy/confirm what I suspected for some time.;)

P.

Guess I will look up the PN for any given year 91-95 and compare to the narrow body, but I am betting they are the same

Reverse light ARE different though

[32valvZ]

Brake and turn signal lens approximate measurements are the same on my 93 Ruby (LT1) and on my 92ZR-1 Tail light/brake lens are about 6 1/4" wide by 5" high on both cars. Reverse lights measure 3" wide and 6 1/2" on both cars. Rear side light/reverse lights are 1 7/8" high and 10" long on both cars.

As far as differences in body panels go (within the ZR-1 line), aside from the belt moulding, as someone mentioned, the front 1/4 side covers are different. The 90 stands alone. The 91-94 are another style & the 95 are also stand alone.

[Jeffvette]

1) are the doors a different size?

Yes, the door line is different in about the middle. You can see it starting to bow out.

2) are the rear side light housings a different size?

No, they are the same.

3) are the brake and turn signal lenses a different size?

No, they are the same.

4) are the backup lenses and license plate assembly a different size?

License plate frame (black portion) is different. The back up lights are the same.

5) is the rear end carpet and internal trim a different size?

No, the inner tub is the same. So the carpet is the same.


6) is the "CORVETTE" script a different size?

90 is smaller than the 91-95 CORVETTE emblem. But in 90 they were the same size.

7) within the ZR-1 line, 90-95, were there any parts that changed size/fitments from year to year? In other words will the early ZR-1 body parts fit the late model ZR-1's

Yes, everything will bolt right up, or I should say bond right up in certain cases.