View Full Version : Parting out 1991 ZR-1
Polo-1
07-06-2008, 05:04 PM
Here is a small list. Ask if you need something that not listed yet. Motor and Trans are gone.
1991 ZR-1 LT5 Parts List Car was Red/Red with 61 k on it
Rear view Mirror $25-Goldcylon
Engine oil cooler…$25 -63vettezo6
Engine oil cooler hose….$150-Goldcylon
Air Cleaner Assembly with K&N..$65-Chris
Complete Dana 44 Conversion Kit…..$1800
Front Left sideTurn #16514491….$15-Goldcylon
Front Right side Turn#16514492….$15-Goldcylon
Rear side marker right#16508520..$15-Goldcylon
Rear side marker left#16508519..$15-Goldcylon
Front Fog/Turn left….$45
Front Fog/Turn right…$45
Reverse lights pair ………$25
Horns…..$15
A/C blend door#10158085….$10
Blower Motor……$15
Blower housing under dash…$40
Blower housing #52450785 engine side….$200 both parts-63vettezo6
Left and Right Gills panels……$40-DMark
Hood Latches……$25-1991ZR1
Hood Latch cables..$25
Accelerator pedal…..$20
Accelerator/cruise cables…….$25
Emergency Brake handle ……..$25
FX3 shock controller rear set…..$60-Chris
FX3 shock controller front set…….$60-kabnvtt
Rear shock pair…….$75-63vettezo6
FX3 seat switches…..$30-Goldcylon
FX3 computer…….$50-1991ZR1
Front shock pair(New)…..$150-63vettezo6
Upper Rad shroud(with stickers)…$50-63vettezo6
Coolant over flow……$10-dbriana
Vacuum ball….$5
Fan Assembly………..$75-Chris
Lower Rad shroud…..$10
Wiper motor……$10-xlr8nflorida
Front impact bumper………..$40
Rear Impact bumper (ZR1)……$75-Chris maybe
Rear bumper (no light/moldings)….$500-63vettez06
Master Brake cyl…………..$50
Battery tray………..$10
Upper coolant reservoir…..$15-dbriana
Clutch/brake pedals…..$15-Gustav(brake)
Cruise control bracket…..$10
Air pump Smog stuff…….$25-xlr8nflorida
Left head light assembly (w/motor)..$50-1991ZR1
Right head light assembly (w/motor)..$50-1991ZR1
Driver side mirror…$45
Passenger side mirror…$45-jerrydirks
Gas tank…..$25-Chris
Evap canister&lines….$25
Borla 2.5 (mid pipes gone)….$200-Chris
ECM bracket (small crack)….$5
Spare Tire Bag(bad zipper)….$25
Spare tire…………$25
Glove box tray(dash)…$5
Glove box door(dash)…$10-dbriana
Head Light module….$40-1991ZR1
Inside wire harness (from dash/fuse boxes 2/relays/FX3/doors/seats/ABS/tail lamps) this was $1147 new from GM no longer…..$400
A/C dash vents………$5 ea.-dbriana (left side only)-xlr8nflorida the rest of dash vents
Rear tail lights w housings …..$30-xlr8nflorida
Instrument panel (Canadian)…..$350
Head light switch…….$25
DIC panel……….$20-xlr8nflorida
Bose/CD and module ( unknown cond.)….. $75-webruke
A pillar moldings……$5ea
Power key switch/and bezel ( switch and bezel are epoxy together it works)…..$25-Goldcylon
Brake Booster ZR-1/PBR ( gone from GM)..$200
Rear cargo moldings ……..$5ea-dbriana (right side only)
Fuel door assembly…..$25-Falconfling
Steering wheel (no air bag)…$50-Ifogot who
Turn signal/wiper/cruise switch…$40 Jarvis
Seats w motors and rails (no rips)..$500 falconfling
The prices do not include shipping, I only charge what the shipping is( no extra ). So if you call it here it's yours.
Please keep it out here what you want, Im getting PMed crazy.
We can PM shipping and payment info.
Thanks Kevin
1991ZR1
07-06-2008, 05:34 PM
I'm interested in the following
Hood latches
FX3 computer
Left headlight assembly
Right headlight assembly
Headlight module
Power key switch and bezel
Sending you a PM
Zr1 Destroyer
07-06-2008, 05:57 PM
If the passenger side is considered the left side I'll take the left side headlight assembly w/motor!
GOLDCYLON
07-06-2008, 06:14 PM
I posted on the other forum at 156 pm as well and also sent you a PM
Ill take the switch and bezel ( Does it have a key?)
Also I want both the front left and right side marker lights
Also the rear side marker lights both sides
Does the FX3 switch include the harness
Please LMK Daryll
GOLDCYLON
07-06-2008, 06:25 PM
Also can you send me a pic of the upper radiator shroud with stickers
goldcylon@cox.net
Thanks Daryll
Polo-1
07-06-2008, 06:40 PM
Lets see if this works, for pictures.
http://s7.photobucket.com/albums/y292/kpie/91%20ZR1%20Parts/
GOLDCYLON
07-06-2008, 07:18 PM
Works great polo. Ill stick with what I have listed do you take Paypal? Daryll
Ill take the switch and bezel ( Does it have a key?)
Also I want both the front left and right side marker turn signal lights
Also the rear side marker lights both sides
Does the FX3 switch include the harness
Polo-1
07-06-2008, 07:27 PM
I'm interested in the following
Hood latches
FX3 computer
Left headlight assembly
Right headlight assembly
Headlight module
Power key switch and bezel
Sending you a PM
Daryll, I think 1991 ZR1 is 1st on the power key/Bezel and head light assemblies.
You are 1st for FX3/seat switches and harness not cut. and all side markers.
NO WIRING WAS CUT FROM THIS CAR... All finger nails inplace, thank JeffVette for that.....
GOLDCYLON
07-06-2008, 08:50 PM
Daryll, I think 1991 ZR1 is 1st on the power key/Bezel and head light assemblies.
You are 1st for FX3/seat switches and harness not cut. and all side markers.
NO WIRING WAS CUT FROM THIS CAR... All finger nails inplace, thank JeffVette for that.....
Kevin Im not going to argue But I was the first on the other forum to post in both the for sale section and the ZR-1 section for the parts I requested. Whatever you think is fair if the your telling me only the front and rear side markers and the FX-3 and seat switches with harness is availalbe I can live with that too bro. Send me a total and a paypal address. IF you deem Im worthy for the switch I will take that too. To make this clean LMK. Daryll
http://forums.*************.com/showthread.php?p=1566196278&posted=1#post1566196278
First to Post with the same list
http://forums.*************.com/showthread.php?t=2071343
First to post again about the same list
GOLDCYLON
07-06-2008, 09:02 PM
NO WIRING WAS CUT FROM THIS CAR... All finger nails inplace, thank JeffVette for that.....
LOL ok I will I think I owe him a beer or too as well What will you need for shipping
Im at $90 for the front and rear side marker lights and the FX3 switches with harness. I do not want the radiator shroud. Maybe the oil cooler lines if they are still available? Is the radio bezel surround avail
Does the AC condensor come with all the ac lines as picd?
-=Jeff=-
07-06-2008, 09:24 PM
the hood in the link avail? if so how much?
63vettezo6
07-06-2008, 09:37 PM
i'll take the:
Oil cooler
a/c box
front shocks
rear shocks
upper rad. shroud
Polo-1
07-06-2008, 09:55 PM
the hood in the link avail? if so how much?
Shipping would be NUTZ:jawdrop: Its big
Im 99336 zip code Washington State. I can help with getting it to a business drop spot. If you want to check shipping try uship.com
Jeff
-=Jeff=-
07-06-2008, 09:56 PM
Shipping would be NUTZ:jawdrop: Its big
Im 99336 zip code Washington State. I can help with getting it to a business drop spot. If you want to check shipping try uship.com
Jeff
I know.. how much you selling the hood for? I want to cover all options
Polo-1
07-06-2008, 09:59 PM
Kevin Im not going to argue But I was the first on the other forum to post in both the for sale section and the ZR-1 section for the parts I requested. Whatever you think is fair if the your telling me only the front and rear side markers and the FX-3 and seat switches with harness is availalbe I can live with that too bro. Send me a total and a paypal address. IF you deem Im worthy for the switch I will take that too. To make this clean LMK. Daryll
http://forums.*************.com/showthread.php?p=1566196278&posted=1#post1566196278
First to Post with the same list
http://forums.*************.com/showthread.php?t=2071343
First to post again about the same list
Your right, 2:56pm my bad...
Power Key/radio bezel to you.
Kevin
Polo-1
07-06-2008, 10:04 PM
I know.. how much you selling the hood for? I want to cover all options
Jeff........Man......I'll help with a $400 for the hood.
-=Jeff=-
07-06-2008, 10:13 PM
Jeff........Man......I'll help with a $400 for the hood.
thanks I need to check into shipping now.. LOL
Polo-1
07-06-2008, 10:22 PM
i'll take the:
Oil cooler
a/c box
front shocks
rear shocks
upper rad. shroud
A/C box ?
inside
http://i7.photobucket.com/albums/y292/kpie/91%20ZR1%20Parts/IMG_1611.jpg
Or out in the engine side?
63vettezo6
07-06-2008, 10:35 PM
outside. What is the price on the bcm?
A/C box ?
inside
http://i7.photobucket.com/albums/y292/kpie/91%20ZR1%20Parts/IMG_1611.jpg
Or out in the engine side?
Polo-1
07-06-2008, 11:04 PM
outside. What is the price on the bcm?
BCM:confused: I need a little more help. Working on PM's, emails.:censored:
Polo-1
07-06-2008, 11:05 PM
Please check your name on the list, it should be good at this point.:wave:
-=Jeff=-
07-06-2008, 11:10 PM
BCM:confused: I need a little more help. Working on PM's, emails.:censored:
BCM = CCM Central Control Module
63vettezo6
07-06-2008, 11:25 PM
BCM:confused: I need a little more help. Working on PM's, emails.:censored:
body control module. It is in the dash and stores the mileage and info for the car. It is silver and is about 5"X7"
Jeffvette
07-07-2008, 12:05 AM
body control module. It is in the dash and stores the mileage and info for the car. It is silver and is about 5"X7"
Commonly referred to as the CCM in the early ZR-1's. Not for sale, sitting on my shelf already, along with the ECM and a few other electronics.
GOLDCYLON
07-07-2008, 01:21 AM
Kevin is this evap canister with lines you have listed at $25? If so add it to my ever growing list lol.
http://s7.photobucket.com/albums/y292/kpie/91%20ZR1%20Parts/th_IMG_1496.jpg
Also is the sunvisors and rear view mirror still available?
http://s7.photobucket.com/albums/y292/kpie/91%20ZR1%20Parts/th_IMG_1582.jpg
Polo-1
07-07-2008, 01:41 AM
no, thats the a/c lines and dryer. Jeff has them and the sunvisors. I'll get a picture of it tomorrow. do have the mirror with lights $25
GOLDCYLON
07-07-2008, 01:51 AM
no, thats the a/c lines and dryer. Jeff has them and the sunvisors. I'll get a picture of it tomorrow. do have the mirror with lights $25
Ok LMK. Is Jeff keeping the AC lines and sun visors if not I want those. I will take the mirror as well
tomtom72
07-07-2008, 07:33 AM
May I ask if the front A-frames are availible.....upper & lower, both sides?:o
Thanks for your time!:thumbsup:
Tom
BLACK90ZR1
07-07-2008, 10:03 AM
How about the locking lug nuts, the locking lug nut socket, and the socket extension?
DMark
07-07-2008, 03:26 PM
".....Left and Right Gills panels……$40"
If these aren't spoken for I Will Take Em!
http://i26.tinypic.com/vosmxc.jpg
http://i30.tinypic.com/2uh0311.jpg
Polo-1
07-07-2008, 09:57 PM
DMark
Let me get a better photo of them.
http://s7.photobucket.com/albums/y292/kpie/91%20ZR1%20Parts/
new photos added
DMark
07-07-2008, 10:58 PM
DMark
Let me get a better photo of them.
http://s7.photobucket.com/albums/y292/kpie/91%20ZR1%20Parts/
new photos added
Kevin,
Those will work for what I need.
PM coming to you!
Polo-1
07-07-2008, 11:04 PM
May I ask if the front A-frames are availible.....upper & lower, both sides?:o
Thanks for your time!:thumbsup:
Tom
If 63vettezo6 does not take the whole front clip, I will take it apart.
$20 per arm
$40 per knukle with bearing
$20 per caliper
$50 for rack
63vettezo6
07-07-2008, 11:11 PM
If 63vettezo6 does not take the whole front clip, I will take it apart.
$20 per arm
$40 per knukle with bearing
$20 per caliper
$50 for rack
I'm taking it. Does it include the croos member and powere steering unit? As in the picture.
Polo-1
07-08-2008, 12:20 AM
I'm taking it. Does it include the croos member and powere steering unit? As in the picture.
You are down for shocks, so the only thing missing will be the PS pump and hose.
guinnessdood
07-08-2008, 02:18 AM
A/C condencer….$45
I want it.
Uly
tomtom72
07-08-2008, 07:07 AM
If 63vettezo6 does not take the whole front clip, I will take it apart.
$20 per arm
$40 per knukle with bearing
$20 per caliper
$50 for rack
I fully understand. Thanks for the reply and your time!:thumbsup:
Tom
63vettezo6
07-08-2008, 08:21 AM
You are down for shocks, so the only thing missing will be the PS pump and hose. Did the power steering pump and hose go with the motor? If not how much?
Zr1 Destroyer
07-08-2008, 06:23 PM
Right head light assembly (w/motor)..$50-1991ZR1
If 1991 passes on the passenger side motor/assem I'll take it...thanks!
Polo-1
07-09-2008, 12:18 AM
More photos added.
Rear bumper, tire bag, plate holder, HVAC parts.
http://s7.photobucket.com/albums/y292/kpie/91%20ZR1%20Parts/
Vette92-97
07-09-2008, 01:37 AM
I'm looking for the driver's side exterior door molding strip ........ don't ask me why I need this now. Anyway, I would purchase both driver and passenger if it makes a difference. Did not see this part listed nor do I know if it is available. Thanks for your help.
Mike Boggs
1994 ZR-1 AB/Blk #162
Polo-1
07-09-2008, 02:05 AM
Mike
If I take the driver side door apart you will be first. passenger side toast.
Polo-1
07-10-2008, 11:38 PM
Ok LMK. Is Jeff keeping the AC lines and sun visors if not I want those. I will take the mirror as well
I found the sun visors!!!!!!! Drivers side :( passenger side :cool: The cloth on the drivers side is faded and loose.
GOLDCYLON
07-11-2008, 02:37 AM
I found the sun visors!!!!!!! Drivers side :( passenger side :cool: The cloth on the drivers side is faded and loose.
How much for the passenger side?
zolman
07-11-2008, 07:22 AM
Do you have the Electronic Climate Control Module, Delco part no. 16061602.
It is used to automatically control the heater/AC fan. It is located in the back right side of the engine compartment and has a double and quad electrical connectors going into it. It has a louvered aluminum assembly connected to a plastic body.
I'll be away from my computer this weekend so call, Larry Zoller 812-453-2758.
Polo-1
07-11-2008, 08:56 PM
Do you have the Electronic Climate Control Module, Delco part no. 16061602.
It is used to automatically control the heater/AC fan. It is located in the back right side of the engine compartment and has a double and quad electrical connectors going into it. It has a louvered aluminum assembly connected to a plastic body.
I'll be away from my computer this weekend so call, Larry Zoller 812-453-2758.
Sorry Jeffvette has that.
Polo-1
07-11-2008, 09:11 PM
I want it.
Uly
Sorry I thought I had it, Jeffvette has it. I do have the evaporator( the one in the firewall).
Kevin
Polo-1
07-12-2008, 08:37 PM
How much for the passenger side?
Daryll, It's a repeat customer day:dancing
Buy one get one free:sign10:
$20 for the both. Yes the lights work in both mirrors.
GOLDCYLON
07-14-2008, 09:56 AM
Daryll, It's a repeat customer day:dancing
Buy one get one free:sign10:
$20 for the both. Yes the lights work in both mirrors.
Ok pull them aside do you have an updated listed yet for the frequent buyers program? D :mrgreen:
Polo-1
07-14-2008, 08:47 PM
All repeat buyers receive a mystery "part" that just means I'm to lazy to look up the correct name,and part#:dontknow: :sign10:
GOLDCYLON
07-14-2008, 10:14 PM
All repeat buyers receive a mystery "part" that just means I'm to lazy to look up the correct name,and part#:dontknow: :sign10:
:sign10: Too funny!
Ok folks I received my parts today. They were clean, Carefully packed and zero surprises. Great job to Kevin and Jeff for pieceing out this car with care. Kevin you da man and PM Sent!!!!
Polo-1
07-14-2008, 11:15 PM
Thanks Daryll
I'm Glad to hear this. You sell stuff and hope everyone is happy. I would not sell it if I would not use it on my car:cool:
:wave:
Kevin
1991ZR1
07-15-2008, 06:25 AM
I want the cruise control bracket also.
sending a PM.
How about the driver side window switch Tim
Polo-1
07-15-2008, 09:02 PM
I think Hammer wanted switches:???: John were are you.
Hammer
07-16-2008, 08:00 AM
I think Hammer wanted switches:???: John were are you.
Yeah, I did. You mentioned Jeff had those last time we spoke.
I'll call tonight about that and we can chat.
But switches we talked about to be picked up in Portland were:
Door Ajar
Rear hatch release
Rear Hatch Ajar
Windows (L & R)
Mirror Adjustment
-=Jeff=-
07-16-2008, 10:47 PM
Driver side mirror…$45
Still have this one???
Polo-1
07-17-2008, 10:39 PM
THIS IS CLOSED=D>
63vettezo6 Bought the car :handshak:
Thanks everyone:)
GOLDCYLON
07-17-2008, 11:10 PM
THIS IS CLOSED=D>
63vettezo6 Bought the car :handshak:
Thanks everyone:)
Wow Kevin congrats. Im glad I got in there when I did. D ;)
Sihler
07-19-2008, 04:02 AM
Do you happen to still have the thermostat housing assembly, both sides with the thermostat in the middle?
GOLDCYLON
07-19-2008, 04:34 AM
Do you happen to still have the thermostat housing assembly, both sides with the thermostat in the middle?
It went with the motor I remember Kevin saying so. Long gone. GC
Sihler
07-19-2008, 04:04 PM
Thanks
5bear4
08-04-2008, 10:43 PM
Hey Jeff and Kevin I have been out of the loop for a little while. i asked about the fenders (gills) and wheels (sawblades) but never heard from you guy's about prices. Are these parts gone or still around. Please let me know.
Polo-1
08-04-2008, 11:58 PM
Yes, parts are gone ( car went to 63vettez06 ).
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.