PDA

View Full Version : Winter special


Jeffvette
11-20-2007, 07:58 PM
Well, I know winter time is when most of you like to do your mods as you want to drive your cars when the weather is nice.

This will be good from 11/22/07-2/29/08. So you have 3 months. To get this deal I must have the parts in my hand no later than the 29th of Feb.

Package 1:
Engine refinishing color of your choice. With return shipping for US customers and a complete set of gaskets to do reassmeble the motor. 350.00

Package 2:
Add in porting for the plenum & injector housings for an additional 900 for a total of 1,250

The gaskets included will be all three TB gaskets, plenum and injector housing gaskets and the coolant outlet pipes.

Hack
11-20-2007, 08:56 PM
I am very interested! I will talk to you about this more in depth when I come to pick up my car.

Ccmano
11-20-2007, 09:08 PM
Jeff,

Can you list the parts we would need to send you for the whole works?

Thanks
Hans
:cheers:

Jeffvette
11-20-2007, 09:12 PM
I am very interested! I will talk to you about this more in depth when I come to pick up my car.

Glen, if you want you can skip picking it up and I can get started on it. I'll call you back in a few minutes.

Jeffvette
11-20-2007, 09:14 PM
Jeff,

Can you list the parts we would need to send you for the whole works?

Thanks
Hans
:cheers:

This is for the refinish

Air horn
TB
Plenum
Injector housings
Coolant outlet pipes
Cam covers

And if you want to
Hard pcv tube on the drivers side
Hard coolant line on the passenger side
Map sensor bracket
Map sensor cover

Zr1 Destroyer
11-23-2007, 12:20 AM
Wow.....that's a good deal!!!!!!!:occasion1

GOLDCYLON
11-23-2007, 02:15 AM
This is for the refinish

Air horn
TB
Plenum
Injector housings
Coolant outlet pipes
Cam covers

And if you want to
Hard pcv tube on the drivers side
Hard coolant line on the passenger side
Map sensor bracket
Map sensor cover


I can tell you Jeffs Work is outstanding he did my motor in July and it was an decison I will never regret. =D>

bobbyhi
11-25-2007, 08:41 PM
I'm seriously thinking of having you do the package #2 if I get the balls to tackle taking everything off the car:mrgreen: . Looks like the cam covers will be hardest. Do you do the "Artic White" color? Also, do you do PayPal? I will probably PM with a couple of more questions before I decide. Thanks Jeff:handshak:

carter200
11-25-2007, 11:57 PM
While you are at it how about having those coolant pipes engraved and replacing that old throttle body plate with a billet engraved one. Just ship me your coolant pipes and I'll engrave than and ship them and the billet throttle body plate to Jeff for PCing with your other items. PM me if interested.

cuisinartvette
11-26-2007, 04:28 AM
Thats an awful good bang for the buck, more hp and looks the part, too.

Once day Jeff will do some 'coating for me and Carter-youll be getting some engraving work on those pieces if not come old school stuff before that.

Jeffvette
11-26-2007, 04:48 AM
I'm seriously thinking of having you do the package #2 if I get the balls to tackle taking everything off the car:mrgreen: . Looks like the cam covers will be hardest. Do you do the "Artic White" color? Also, do you do PayPal? I will probably PM with a couple of more questions before I decide. Thanks Jeff:handshak:

Bob, removing the parts isn't that bad. You just take your time. I can do a artic white color. And yes, I accept paypal. Feel free to call.

Jeffvette
11-26-2007, 04:49 AM
While you are at it how about having those coolant pipes engraved and replacing that old throttle body plate with a billet engraved one. Just ship me your coolant pipes and I'll engrave than and ship them and the billet throttle body plate to Jeff for PCing with your other items. PM me if interested.

:dancing

bobbyhi
11-26-2007, 08:51 AM
Thanks for the offer but I already have the engraved pipes and the TB plate done.:thumbsup: You could come out and remove the parts for me:mrgreen: :mrgreen:




While you are at it how about having those coolant pipes engraved and replacing that old throttle body plate with a billet engraved one. Just ship me your coolant pipes and I'll engrave than and ship them and the billet throttle body plate to Jeff for PCing with your other items. PM me if interested.

DaveK
11-26-2007, 12:53 PM
Thanks for the offer but I already have the engraved pipes and the TB plate done.:thumbsup: You could come out and remove the parts for me:mrgreen: :mrgreen:

Bob, if you want some help removing the parts just let me know.

I'll even bring my own hammer. :wink:

Dave

carter200
11-26-2007, 01:23 PM
Thats an awful good bang for the buck, more hp and looks the part, too.

Once day Jeff will do some 'coating for me and Carter-youll be getting some engraving work on those pieces if not come old school stuff before that.

Thanks and look forward to working on your items :thumbsup:

carter200
11-26-2007, 01:26 PM
Thanks for the offer but I already have the engraved pipes and the TB plate done.:thumbsup: You could come out and remove the parts for me:mrgreen: :mrgreen:

I always send DaveK to do my light work :mrgreen:

carter200
11-26-2007, 01:27 PM
:dancing

Jeff, did you see the PM I sent you:thumbsup:

Jeffvette
11-26-2007, 03:52 PM
Jeff, did you see the PM I sent you:thumbsup:

Just replied.



Guys, also please don't all slam me in Feb. I put the Feb deadline in so I can guarantee that you will be on the road for spring time. If I get 12 sets in on feb 1, some of you will be waiting.

rogerzr1
11-26-2007, 09:55 PM
Jeff,

How long would it take to have the 2nd package done? Can you paint it in Steel Blue Metalic?

Jeffvette
11-26-2007, 10:28 PM
Roger, 6 weeks turn around time. And for the color, I haven't seen a steel blue car in a long time, just send me your gas door and I can get it matched.

bradslt5
11-27-2007, 05:01 AM
I bought kelli burnt car . my ? is the top end is somewhat cooked nothing is warped just discolored is there an extra charge for this ?also can cylinder heads be coated also? thankyou:thumbsup:

Jeffvette
11-27-2007, 08:06 PM
No extra charge unless there is any damage. Cylinder heads can be done, but there will be an extra charge for additional cleaning and to strip them down. no need to really do the heads IMHO.

bradslt5
11-27-2007, 11:16 PM
jeff , thanx for the info i will see if i can get things done this week and send them to you (with a ck)hehe

Jason 91
11-30-2007, 04:38 PM
Does anyone know the approximate shipping weight of these items?

Air horn
TB
Plenum
Injector housings
Coolant outlet pipes
Cam covers
Hard pcv tube on the drivers side
Hard coolant line on the passenger side
Map sensor bracket
Map sensor cover

Thanks,

Jason

Jeffvette
11-30-2007, 04:41 PM
Does anyone know the approximate shipping weight of these items?

Air horn
TB
Plenum
Injector housings
Coolant outlet pipes
Cam covers
Hard pcv tube on the drivers side
Hard coolant line on the passenger side
Map sensor bracket
Map sensor cover

Thanks,

Jason

7 lbs each injector housing
7 lbs each cam cover
21 lbs for the plenum
Air horn TB combo maybe 6 lbs
Coolant pipes 2lbs

Jason 91
11-30-2007, 04:45 PM
Thanks for the quick reply. That is a really good deal.

Jason

Zr1 Destroyer
11-30-2007, 09:43 PM
Thanks for the quick reply. That is a really good deal.

JasonJiffyVette just coated my top end for me if you want to see his nice powder work first hand!:dancing

Jason 91
12-01-2007, 11:55 AM
I would like to see it first hand although looking at your car might make me want to spend my daughter's college money on performance modifications. :mrgreen:

I'll PM you when I get on the road again. By the way, love the video clip. :thumbsup:

Jason

Zr1 Destroyer
12-02-2007, 02:22 PM
I would like to see it first hand although looking at your car might make me want to spend my daughter's college money on performance modifications. :mrgreen:

I'll PM you when I get on the road again. By the way, love the video clip. :thumbsup:

JasonCool man, drop me a pm anytime.....start saving for some headers and exhaust (if not done already?)!

Gunny
12-12-2007, 12:23 PM
This is for the refinish

Air horn
TB
Plenum
Injector housings
Coolant outlet pipes
Cam covers

And if you want to
Hard pcv tube on the drivers side
Hard coolant line on the passenger side
Map sensor bracket
Map sensor cover

OK, I've had the plenum off (more than a couple of times) as well as the IJH. But I've never had the cam covers off ... what's involved/how difficult/etc. etc. ??? Any clever tricks to make it easier?

I think I need (read: want) to do this but need to check with the boss on the budget (WHAT! Another mod???)

Shipping question? best to ship in multiple, well padded packages? or one big package?

Thanks for the info.

George
1990 Black/Black
www.zrwon.com (http://www.zrwon.com)

Jeffvette
12-12-2007, 03:06 PM
OK, I've had the plenum off (more than a couple of times) as well as the IJH. But I've never had the cam covers off ... what's involved/how difficult/etc. etc. ??? Any clever tricks to make it easier?

I think I need (read: want) to do this but need to check with the boss on the budget (WHAT! Another mod???)

Shipping question? best to ship in multiple, well padded packages? or one big package?

Thanks for the info.

George
1990 Black/Black
www.zrwon.com (http://www.zrwon.com)


George, the worst part is removing the brake booster. Here is a write up going through all the steps. I'm also west coast and have later hours so I'm a phone call a way in helping you through a tough spot.

Part 1 http://pnwzr1.net/LT5_tear_down.htm

Part 2 http://pnwzr1.net/LT5_tear_down2.htm

As far as shipping. People usually use two boxes. I have had some that send it all in one box. UPS guy usually is not very happy.

Gunny
12-12-2007, 05:57 PM
George, the worst part is removing the brake booster. Here is a write up going through all the steps. I'm also west coast and have later hours so I'm a phone call a way in helping you through a tough spot.

As far as shipping. People usually use two boxes. I have had some that send it all in one box. UPS guy usually is not very happy.

Put me in line as a very strong probable ... should have a decision very soon. Wish I had the time to pull the parts right now ... we're unseasonably warm in the southeast at the present but it'll probably be freezing after Christmas when I'll finally have time in the schedule to do the work. Oh, well! Garage is nice but isn't always as warm as I would like.

I'll keep you posted on the progress. I'll also want to talk with you about the finish and the color(s) on the lettering. I've seen pics of your work and it is truly outstanding ... also makes deciding which way to go a bit tough. Be thinking about best "look" for a 90 black/black with 95 wheels. Check my site (http://www.zrwon.com) for plenty of pics. If you haven't visited before, I think you'll like some of the eye candy.

George

Jeffvette
12-12-2007, 06:06 PM
I'll keep you posted on the progress. I'll also want to talk with you about the finish and the color(s) on the lettering. I've seen pics of your work and it is truly outstanding ... also makes deciding which way to go a bit tough. Be thinking about best "look" for a 90 black/black with 95 wheels. Check my site (http://www.zrwon.com) for plenty of pics. If you haven't visited before, I think you'll like some of the eye candy.

George


George, sounds good, and thanks for the compliment. As far as color selection, on a black car either one of the reds i do looks spectacular. Either the bright red or the darker cherry red. I've also got a nice color called shocker yellow.

All three shown below.

Bright red in a black car
http://pnwzr1.com/images/Engine/0004.jpg

Dark red in a black car
http://pnwzr1.com/images/Engine/0032.jpg

Shocker yellow
http://www.pnwzr1.com/images/intake1.jpg

bradslt5
12-12-2007, 06:13 PM
jeff do you have a color that simulates the blueing on a gun ?

Jeffvette
12-12-2007, 06:16 PM
jeff do you have a color that simulates the blueing on a gun ?

I do not.

GOLDCYLON
12-14-2007, 10:25 PM
George, sounds good, and thanks for the compliment. As far as color selection, on a black car either one of the reds i do looks spectacular. Either the bright red or the darker cherry red. I've also got a nice color called shocker yellow.

All three shown below.

Bright red in a black car
http://pnwzr1.com/images/Engine/0004.jpg

Dark red in a black car
http://pnwzr1.com/images/Engine/0032.jpg

Shocker yellow
http://www.pnwzr1.com/images/intake1.jpg


Damn Jeff every time I see that Shocker yellow plenum I have a craving for a monster energy drink. WTF? :sign10:

Jeffvette
12-15-2007, 07:13 AM
You know you want it. Maybe on the brake calipers?

GOLDCYLON
12-15-2007, 03:08 PM
You know you want it. Maybe on the brake calipers?

Thats a little to bright for me. BTW it only cost $18 with insurance to send that full set of calipers. So yes $50 for that other set was way off. But total it was still a good price. I should have pulled the trigger higher.

ArcticZR1
12-15-2007, 08:00 PM
Jeff - The shop said they wanted $400 for the R&R. They said I could leave it there will the parts are being done. How long was the turn around for package 2? And can you post some pics of the stock like silver finish and the silver fleck again? Thanks

Jeffvette
12-15-2007, 08:12 PM
Porting will take a little bit longer, speculate around 45-50 days to complete.

Stock silver
http://pnwzr1.com/images/Engine/0015.jpg

Silver metallic
http://pnwzr1.com/images/Engine/0016.JPG

GOLDCYLON
12-16-2007, 03:02 AM
Jeff - The shop said they wanted $400 for the R&R. They said I could leave it there will the parts are being done. How long was the turn around for package 2? And can you post some pics of the stock like silver finish and the silver fleck again? Thanks

Arctic heres a link to my silver flake job that Jeffvette did as well. Carter 200 did the LT-5 on the coolant pipes and LT-5 TPI cover. GC

http://zr1netregistry.com/forum/showthread.php?t=4116

ArcticZR1
12-16-2007, 11:05 AM
Thats awesome. I am caught between the silver flake...or the stock finish. The stock finish looks a little darker? I am going to have it done now that I have a shop to take it apart for me.

carter200
12-16-2007, 11:27 AM
Arctic heres a link to my silver flake job that Jeffvette did as well. Carter 200 did the LT-5 on the coolant pipes and LT-5 TPI cover. GC

http://zr1netregistry.com/forum/showthread.php?t=4116

GC, Thanks for the kind words and Jeff does great work on the PCing :cheers:

ArcticZR1
12-16-2007, 12:43 PM
Which color is this for the PC? http://www.zr1netregistry.com/_MG_6513.JPG
Thats the color I'm leaning towards with black letters and the numbers 4 and 32 in red.

Jeffvette
12-16-2007, 02:54 PM
Kind of hard to tell with the low light in the picture, but it looks like a flat silver with a clear over it.

Jagdpanzer
12-16-2007, 03:28 PM
Which color is this for the PC? http://www.zr1netregistry.com/_MG_6513.JPG
Thats the color I'm leaning towards with black letters and the numbers 4 and 32 in red.

Where do you find the fancy intake plenum shown in the photo?

Jeffvette
12-16-2007, 03:29 PM
Usual cost is about 2,500 to do that. Lots of cutting and welding involved. Not much gain unless you have a full tilt car.

ArcticZR1
12-16-2007, 03:43 PM
Here's another pic of it. This car is the Ruby that was for sale in HI. http://www.zr1netregistry.com/ZR1.2.JPG

Jeffvette
12-16-2007, 05:17 PM
Looks to be a little darker silver, maybe more of a platinum tint to it.

Jeffvette
12-16-2007, 05:20 PM
Also for those of you interested in Carters pieces, you can get the through me for 165 that includes shipping.

ArcticZR1
12-16-2007, 06:48 PM
Yeah that is a little darker in that pic....The silver I like is a little lighter. But the clear is good.

carter200
12-16-2007, 07:36 PM
Jeff, You're a good guy :worship:

Jeffvette
12-22-2007, 03:44 PM
Some updated pics for Bobbyhi

http://www.pnwzr1.com/images/Customers/BA/1.jpg

http://www.pnwzr1.com/images/Customers/BA/2.jpg

http://www.pnwzr1.com/images/Customers/BA/3.jpg

http://www.pnwzr1.com/images/Customers/BA/4.jpg

http://www.pnwzr1.com/images/Customers/BA/5.jpg

Nick
12-22-2007, 05:31 PM
Are those white or pink?

Jeffvette
12-22-2007, 05:37 PM
White, interior lighting does squat for the color. It's been raing, and I don't think it's going to stop until July.

bobbyhi
12-22-2007, 09:44 PM
Jeff, I just got back in the country and saw my covers. Sure look good. Too bad the color looks pink - if you can, could you take some more with the white a little more looking white??? I will PM you tomorrow with a couple of questions.

-=Jeff=-
12-22-2007, 09:55 PM
Hey Jeff, What is you turnaround time for the porting and powder coating?

Also for powder coating only.. just curious

Jeffvette
12-23-2007, 03:11 AM
Jeff, I just got back in the country and saw my covers. Sure look good. Too bad the color looks pink - if you can, could you take some more with the white a little more looking white??? I will PM you tomorrow with a couple of questions.

Bob, just give me a jingle tomorrow. I'll be around. I'll try to grab some pics out in natural light.

Jeffvette
12-23-2007, 03:14 AM
Hey Jeff, What is you turnaround time for the porting and powder coating?

Also for powder coating only.. just curious

For just the powder alone. I allocate a week for incoming shipment a week for the work to be done and then a week to ship back.

Porting work will add roughly 5 weeks depending upon current load.

-=Jeff=-
12-23-2007, 10:49 AM
For just the powder alone. I allocate a week for incoming shipment a week for the work to be done and then a week to ship back.

Porting work will add roughly 5 weeks depending upon current load.

Thanks for the info!!!

cuisinartvette
12-23-2007, 11:18 AM
Motor is gonna look hot in white.

I noticed everything looks pink if you O.D. on Levitra. :sign10:

4DSZR1
12-23-2007, 02:55 PM
Jeeezuz that looks good.

Another good job by Jeff. :)

DaveK
12-23-2007, 03:06 PM
Welcome back Bob! That's going to look great! :thumbsup:

tf95ZR1
12-24-2007, 10:02 PM
Now if we just had some cool looking cam cover emblems
to go with our PC'd cam covers..........

Aurora40
12-26-2007, 11:47 AM
http://www.pnwzr1.com/images/Customers/BA/1.jpg


Here is the picture with the color adjusted:

Jeffvette
12-26-2007, 02:54 PM
Thanks Bob. We should have some nicer weather and I can get out and do some shots.

Just an update, I'm getting busier with this special. I've got three sets coming in from Canada.

Cdn ZR1 Mike
12-29-2007, 02:32 AM
Thanks Bob. We should have some nicer weather and I can get out and do some shots.

Just an update, I'm getting busier with this special. I've got three sets coming in from Canada.

:mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:

Cdn ZR1 Mike
12-29-2007, 02:45 AM
As far as shipping. People usually use two boxes. I have had some that send it all in one box. UPS guy usually is not very happy.

Now he tells me.....:mrgreen:

carter200
12-29-2007, 05:47 AM
Don't forget about doing the coolant pipe engraving and a new billet throttle plate while you are getting the new coating :thumbsup:

Jeffvette
12-31-2007, 11:14 PM
Updated pic to show it's white and not pink :D Damn sun finally came out today!

http://www.pnwzr1.com/images/Customers/BA/6.JPG

flyin ryan
01-01-2008, 02:45 AM
it was always white. just need to put down the Elton John rose coloered glasses;) .

GOLDCYLON
01-01-2008, 05:25 AM
it was always white. just need to put down the Elton John rose coloered glasses;) .


Yeah thats the ticket Yeah!!! :wink:

phrogs
01-01-2008, 03:18 PM
Damn Jeff I didnt know you were doing a special!
I leave for a month and all hell break's loose!

I have 2 motors that I need to have done.

Jeffvette
01-01-2008, 03:46 PM
Damn Jeff I didnt know you were doing a special!
I leave for a month and all hell break's loose!

I have 2 motors that I need to have done.

You know how to get a hold of me :wink:

Gunny
01-30-2008, 10:47 AM
Check your PM

GOLDCYLON
01-30-2008, 11:37 AM
Check your PM

Hes in Costa Rica this week might take him a few days to respond. :mrgreen:

Gunny
01-30-2008, 01:19 PM
:thumbsup: I wouldn't mind being in Costa Rica this week

GOLDCYLON
01-30-2008, 02:31 PM
:thumbsup: I wouldn't mind being in Costa Rica this week

No kidding I hope he gets some sunshine. He doesnt get much in Washington. I Love Ft Lewis and the Seatle area but admit the only differnce in the day was how hard it was going to rain from day to day. lol

Gunny
01-30-2008, 02:55 PM
Actually, I was in Costa Rica during January (a lotta years ago) and thoroughly enjoyed my brief stay. I vowed to definitely go back and spend more time, but here I am (a lotta years later) and I still haven't made it back. Costa Rica is a worthwhile vacation destination ... from what I understand there is a significant American population who make CR their retirement home.