rear window drain

[72ZR1]

like to know if any one installed the rear window drain kits and if they work.:???:

[A26B]

like to know if any one installed the rear window drain kits and if they work.:???:

Yes....and Yes

[buddyboy]

yes and yes


92 ZR-1 #330 White/




yes and yes=D>


92 ZR-1 #330 White/White

[buddyboy]

yes and yes=D>

92 ZR-1 #330 White/White

[ZR1FUN]

Yes and Yes. I actually get a sucking sound the water goes down so fast.

[72ZR1]

thanks every one putting my order today:cheers:

[Aurora40]

I put one on my '87 and thought it was a real POS. I got the Mid America kind that came with the drill bit. Well the brass part didn't sit flush, and the lip was so high lots of water didn't drain. Much of what did drain drained between the hose and the body, not through the hose.

But maybe I just sucked at installing it. I just found most of that mid america stuff like the drains and such to be junk.

[bobbyhi]

thanks every one putting my order today:cheers:


Where are you ordering from??

[SharkPilot]

I may be considered a cheapskate but I just use a length of 1/4" vacuum hose to siphon the water out of mine. The end is trimmed so that it can fit down in there better and it gets the water out just fine.
I don't want to trust my clutziness to drilling a pair of holes in the body. :???:

SharkPilot

[72ZR1]

corvette central

[A26B]

I put one on my '87 and thought it was a real POS. I got the Mid America kind that came with the drill bit. Well the brass part didn't sit flush, and the lip was so high lots of water didn't drain. Much of what did drain drained between the hose and the body, not through the hose.

But maybe I just sucked at installing it. I just found most of that mid america stuff like the drains and such to be junk.

The brass washer does require a bit of massaging to optimize the fit to the contours present. I just put it in, took a punch and a few light taps with a hammer and matched the contour. I put a little RTV under the washer when I installed it for good & wiped it smooth after putting a little pressure on it.

[QB93Z]

I have the drains on the Z, they work great.