Dymags in 17x11

[Azrael]

Hey, I'm looking at an 88 vert that has Dymags in ZR-1 sizes, were there any 17x11 Dymags with an offset that isn't correct for a 90 ZR-1? I don't want to fly out to buy this car for the wheels then get home to them being the wrong offset if the seller doesn't know the specs

[DRM500RUBYZR-1]

A concentric spacer and longer studs are required for proper fitment.
I am not aware of multiple offsets.
:cheers:
Marty

[Azrael]

Interesting, so the 11" Dymags are offset for the base cars?

[LGAFF]

Challenge Style 17x11 Dymags have the correct offset for a 90 ZR-1. The 17x11s in the later style wheels is 56mm... you need a spacer. 1988 has a 56mm offset

[Azrael]

Challenge Style 17x11 Dymags have the correct offset for a 90 ZR-1. The 17x11s in the later style wheels is 56mm... you need a spacer. 1988 has a 56mm offset


What's the best way to tell visually? They do appear to stick out a little on the rear but it's hard to tell from the pics.

[DRM500RUBYZR-1]

Those are gen 1 challenge Dymags.
Disregard my answer as it was for Gen II wheels.
:cheers:
Marty

[Z51JEFF]

The tires on the rear look to be too wide for the wheel.

[Azrael]

The tires on the rear look to be too wide for the wheel.
Hard to tell from the pics, but that's a good point, I hadn't considered someone would be dumb enough to mount 315s on a 9.5" wheel.

[LGAFF]

Its a 9.5, you can fit a 315 on those with no issues