WTB 93 - 95 oil pan

[wfot]

Does anyone have a 93 - 95 oil pan?


used is preferred.....


Thanks

John


Putting a 1990 motor in a 1994 chassis and want to get around the different side that the low oil sensor is on.... anyone with insight on this would be appreciated...

[A26B]

Late, 93~95 Oil Pan will not interchange with EARLY 90~92 models.. Bolt pattern is different & oil pickup is very different.

1990 model did not have a low oil level sensor. 91~92 do have low oil level sensor.

[Jagdpanzer]

The 94-95 pans have several differences including the oil pickup tube, windage tray and baffling. Bolt patterns are also different. Jerry's shows different gaskets.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[wfot]

I am aware that there were several bolt that are different but NOT aware about the pick up tube and windage tray.
it is a 1991 to 1992 as it has a sensor port in the side, thank you Jerry.

what to do then, I have to use the 1991 pan,

Are the wires in the harness long enough to reach the other side?? I am going to bet NO and I really would not want to route wires under/around the pan anyway.

Is there a way to extend the wires properly?

John