Fuel Rail O Rings

[32valvZ]

Are the ones inside the fuel rail, (there are 4) the same as the rest? I got Jerrys O ring kit and have 4 that I cant see where else they go...other than inside the fuel rails...

https://www.jerrysgaskets.com/seal-s...n-90-95-7-5d8/

Thanks, John

[jss06c6]

What year is your ZR-1?

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Since you have a 90’ you should have the 2 different sizes for the injectors themselves. 8 larger for the Primary Injector lowers that mount into the injector housing itself. 24 smaller for the 16 upper of all injectors and 8 lower for the secondary injectors. Then a smaller set of 2 for the fuel line to the fuel rail connection. These last ones are also used for the pipes, rails and regulator connections. That’s probably what your seeing.
H
:cheers:

[32valvZ]

So Phil rebuilt my FPR... I had Jerry send me a FPR O ring kit... this is not for injectors.... only the lines that go to the FPR.... Theyre all the same size. Inside the actual fuel rails, there are O rings... I wasnt sure if theyre the same as the ones where the lines plug into the FPR. I have 4 left and there are 4 bores, 2 in each rail that have O rings inside them...

https://www.jerrysgaskets.com/seal-s...n-90-95-7-5d8/

[Ccmano]

Yes, I believe all the fuel rail o-rings are the same size. I believe there are 9 total O-rings for the rail/regulator.
H
:cheers:

[32valvZ]

Yes, I believe all the fuel rail o-rings are the same size. I believe there are 9 total O-rings for the rail/regulator.
H
:cheers:

I was skeeered to pluck them out of the rail with a pick and ruin them if they were different...