PCV Valve Grommet

[TealZR1]

Appears to be a leak at my front PCV valve (very loose grommet) causing a high idle. I want to slip a small piece of vinyl tubing on the pcv nipples and than reinstall the grommet in hopes this will seal the grommet to the pcv. My question is what is the best way to remove the existing pvc valve. Any tricks to doing this? Very tight quarters. Thanks for your help in advance

[A26B]

Appears to be a leak at my front PCV valve (very loose grommet) causing a high idle. I want to slip a small piece of vinyl tubing on the pcv nipples and than reinstall the grommet in hopes this will seal the grommet to the pcv. My question is what is the best way to remove the existing pvc valve. Any tricks to doing this? Very tight quarters. Thanks for your help in advance

What do you mean, "front" PCV valve? There is a LH(driver side) & RH (passenger side)? Both of these items are available from www.jerrysgaskets.com under the PCV System category.

http://cdn3.bigcommerce.com/s-nkg90o/products/305/images/600/10122200_NS__67801.1414016937.1280.1280.jpg?c=2

[PhillipsLT5]

Replace all of your 25 year old dried up stuff from Jerry with silicone, these are just old cars that need help causing your idle issue

[Dynomite]

Replace all of your 25 year old dried up stuff from Jerry with silicone, these are just old cars that need help causing your idle issue

Yes......I replace all PCV Connections just to get rid of the need for Hose Clamps ;)

Jerry's Dual PCV Valve Connector (http://www.jerrysgaskets.com/connector-dual-pcv-valves-new-90-95-9e1/)
Jerry's Dual PCV Valve Connector Hose (http://www.jerrysgaskets.com/hose-dual-pcv-valves-new-90-95-9c3/)
Jerry's Dual PCV Valve Connector Grommet (http://www.jerrysgaskets.com/grommet-pcv-pipe-elbow-new-90-95-7e3/)

http://i287.photobucket.com/albums/ll142/dynomite007/Dynomite11/6c6a8c6d-3bd7-48e8-ae28-7fa48835bce4.jpghttp://i287.photobucket.com/albums/ll142/dynomite007/Dynomite11/cc07ee5b-a4cc-4a63-b7e0-491cd951b2e6.jpg
http://i287.photobucket.com/albums/ll142/dynomite007/Dynomite11/b53f6b19-43c1-427e-8d91-794769bcd3e7.jpg

New PCV Connections. Installation/Relocation of Plug Wires and New Spark Plugs (http://www.corvetteforum.com/forums/c4-zr-1-discussion/3005470-tech-info-lt5-modifications-rebuild-tricks-500-hp-12.html#post1590759178)