View Full Version : Clutch won't release
hotrodeddy
04-20-2016, 12:07 AM
Clutch pedal pushes down to easy and doesn't release to shift into gear. Everything worked great when I put it away for the winter. I'm the original owner with 13,000 miles and was stored in a heated garage. No sign of any fluid leaks and is not low on fluid. Any ideas what to look for?
Hib Halverson
04-20-2016, 12:37 AM
When you sayClutch pedal pushes down to easy and doesn't release to shift into gear. (snip)
Do you mean that, when you push on the clutch, it stays on the floor after you remove your foot?
Or, do you mean you can push the clutch to the floor and once it's on the floor you can't shift into any gear but, but when you retract your foot the pedal comes back up?
What model year is your ZR-1?
hotrodeddy
04-20-2016, 10:14 AM
my z is a 1990 and yes the clutch pedal is easyer to push down than normal and it does return but can't get it to go into grear when depressed
cuisinartvette
05-10-2016, 11:13 PM
Either you have air in the system or its shot
Racinfan83
05-11-2016, 07:44 AM
Call Jim: http://powertorquesystems.com/Contact.htm
thirstyzr1
05-11-2016, 12:09 PM
I had a leaky slave cylinder and *** soon as the fluid level was low enough I lost the clutch. Pedal would go to the floor and stay there.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.