new member needs help

[Belsy]

Recently purchased my first ZR-1 (90 black w/ red int.) after several other Vettes over the years and need some advice on dash and DIC buttons.
With paperclip I am getting C 13 & H 13 code from CCM but cannot clear because my DIC buttons do not work at all. All fuses look good. No other codes but need help as to should I pull dash apart or??
Also my cluster numbers for mileage seem to be fading as like an old LED watch, is there any one fixing these as I have seen this before on 90 and newer clusters.
Thanks in advance for any suggestions,
Gene

[jonszr1]

Geno, welcome, PM jeffvette he knows about these things tell himyour a newbe.

[Jeffvette]

Gene, the buttons on the DIC units will typically go bad. Most of the time, they just fall out. I imagine there is a problem with the circuit board and if you are handy, you could probably fix it. Otherwise keep your eyes open for a used one on eBay. Gm might still have them. The other option is to contact Jason @ Vette2Vette salvage yard. 815.673.6200

[jonszr1]

just wanted to say THANX for all you do here jeff you have helped me many times. guys like you keep our dream cars alive. Brad=D>

[Z Factor]

Hello Gene and welcome to the forum.:handshak:

Another resource you might check is Arts Corvettes

http://www.artscorvetteparts.com/

Let us know how things progress.

:cheers:

[Belsy]

Gene, the buttons on the DIC units will typically go bad. Most of the time, they just fall out. I imagine there is a problem with the circuit board and if you are handy, you could probably fix it. Otherwise keep your eyes open for a used one on eBay. Gm might still have them. The other option is to contact Jason @ Vette2Vette salvage yard. 815.673.6200

Thank you, I pulled dash apart and got lucky as connector had come loose behind buttons! My real concern now is the fading center cluster numbers any help or repair suggestions??