Console Bezel Color??

[Racinfan83]

I have a small chip off the edge of the ashtray cover I would like to touch up. Does anybody know what touchup paint color will match the color of the cover/bezel on a '90?

[We Gone]

This may be as close as you get.

http://www.mamotorworks.com/Corvette/product/interior-paint-metallic-gray-601395-1

[Racinfan83]

Thanks!

[-=Jeff=-]

yes that is what I am using

https://lh5.googleusercontent.com/-ohWSjWkn-jc/U8yB8V4EtjI/AAAAAAAAF9Y/h5Zt46Tkh08/w331-h588-no/IMG_20140720_193718008.jpg

[KILLSHOTS]

How well does it match the factory paint? Are you able to paint just one piece and have it match up perfectly with everything else?

[-=Jeff=-]

How well does it match the factory paint? Are you able to paint just one piece and have it match up perfectly with everything else?

it is close in the picture I posted.. top bezel is worn and not redone.. bottom is redone

in this picture the ashtray/cup holder door is not redone
https://lh5.googleusercontent.com/-9jZdSBgRqT0/U8yB_QlsQoI/AAAAAAAAF-E/Lj233IktvpY/w331-h588-no/IMG_20140720_215633187.jpg

[nelson007]

Hello Jeft,
How did you prep console before you applied the paint?
Thanks,
Nelson007



QUOTE=-=Jeff=-;210461]yes that is what I am using

https://lh5.googleusercontent.com/-ohWSjWkn-jc/U8yB8V4EtjI/AAAAAAAAF9Y/h5Zt46Tkh08/w331-h588-no/IMG_20140720_193718008.jpg[/QUOTE]

[-=Jeff=-]

Only one panel got primer, then other was cleaned with soap & water

I did a lot of custom cutting and merging on these panels. I found the primer helped keep the coating even

I have 2 doors I am finishing and I primed those as well...

[nelson007]

Thanks Jeff
QUOTE=-=Jeff=-;210468]Only one panel got primer, then other was cleaned with soap & water

I did a lot of custom cutting and merging on these panels. I found the primer helped keep the coating even

I have 2 doors I am finishing and I primed those as well...[/QUOTE]

[Racinfan83]

Jeff - do you think I could spray this in a small cup to get just enough on a tiny brush to fix the chip? If you look at the pic closely you can see the chip on the drivers side of the ashtray cover about 1/3 of the way up from the bottom...

http://i72.photobucket.com/albums/i178/Racinfan83/Erics%20ZR-1%20Vette/2013-04-17182743.jpg

[-=Jeff=-]

Possibly..

I assume you are wanting to save the plaque? Maybe we can work a trade for mine with the plaque