WTB: M8 x 55 Torx Cam Cover Bolts

[A26B]

Your take-out bolts, left over from conversion to SS. Paying $0.50/bolt. No damaged bolts please.

Needed to complete cylinder heads that we are having fully reconditioned. Appx 1,000 bolts needed.

Ship to:
Jerry's Gaskets
3900 Sea Ray Channel
Edmond, OK 73013

Include note with info for us to mail payment to.

Thanks!!:cheers:

[Mystic ZR-1]

Tell us more about the reconditioned cylinder heads?

[XfireZ51]

Your take-out bolts, left over from conversion to SS. Paying $0.50/bolt. No damaged bolts please.

Needed to complete cylinder heads that we are having fully reconditioned. Appx 1,000 bolts needed.

Ship to:
Jerry's Gaskets
3900 Sea Ray Channel
Edmond, OK 73013

Include note with info for us to mail payment to.

Thanks!!:cheers:

Jerry,

Just sold a bunch of NOS one but I have a set of used. I'll take a look.

[A26B]

Tell us more about the reconditioned cylinder heads?

I have quite a few heads, some of which are new. The problem in selling used heads is, most customers want them ready to install, or need to get a comfort level as to the condition, "is the valve job good, how are the seals, etc." I can't answer those question, because I have not good way to know the true condition. A few are ported, some were special, never having had the secondary port throttle machine work done. So, I am trying to standardize the condition, leaving only the configuration to describe, i.e. port work, no secondary throttles, new, used and of course the model year.

What we are doing:

New Heads: Making them all complete to the same level, cam bore plugs, bolts, secondary system, etc.

Used Heads: disassemble completely, clean, inspect all parts for serviceability, including all threads & flatness. Verify spring height & pressure to spec, valve job, replace valves, guides & seats if needed. Verify valve stem height is correct. Reassemble secondary port throttles with Loctite 262 on screws. New valve stem seals, confirm all oiling passages are fully functional, new cam cover filters, paint cam cover.

Each head, new and used,will be packaged in a custom, wooden box with cam cover bolts, new cam bore plugs (4) and a package of new cam cover bolt seals(24). The wooden crate is made to fit inside of a corrugated box for shipping. (UPS charges a LOT to ship a bare wooden box).

The objective is a more concise listing of heads in stock which are ready to ship and of a known condition. We can't warranty the heads because we have no control over the manner in which they are handled, installed and used after they leave our custody. However, a customer will have the assurance and confidence in knowing it has been inspected, reconditioned and is ready for installation. That's a lot better than just assuming.

[GOLDCYLON]

Your take-out bolts, left over from conversion to SS. Paying $0.50/bolt. No damaged bolts please.

Needed to complete cylinder heads that we are having fully reconditioned. Appx 1,000 bolts needed.

Ship to:
Jerry's Gaskets
3900 Sea Ray Channel
Edmond, OK 73013

Include note with info for us to mail payment to.

Thanks!!:cheers:

Jerry will look to see what I have

[PhillipsLT5]

I have a set of stock bolts in the "parts bin", now to lift that heavy box

[A26B]

Jerry will look to see what I have
Thanks "D"

[A26B]

I have a set of stock bolts in the "parts bin", now to lift that heavy box

Well, We can lighten it a bit! :cheers:

[4-cam]

Ive got a set. I can dig em up.

[-=Jeff=-]

I have an NOS set, I think short 2 from being complete. 0.50 for new too?

[A26B]

Ive got a set. I can dig em up.
That would be great!

[A26B]

Jerry,

Just sold a bunch of NOS one but I have a set of used. I'll take a look.

I saw those when you offered them. That was a very good deal for someone. Thanks for taking a look through your stash for the used ones.

[A26B]

I have an NOS set, I think short 2 from being complete. 0.50 for new too?

It's a budget thing Jeff. New ones are worth more than that, but if I spend very much over $0.50, I can buy stainless. Wouldn't be original but SS isn't a bad way to go on the recond heads.

[-=Jeff=-]

It's a budget thing Jeff. New ones are worth more than that, but if I spend very much over $0.50, I can buy stainless. Wouldn't be original but SS isn't a bad way to go on the recond heads.

Understood, just wanted to verify.. Let me look for them

[Scrrem]

Jerry,
I will dig mine out this weekend. I think I can put together two (2) sets for you.
Rich

[A26B]

Jerry,
I will dig mine out this weekend. I think I can put together two (2) sets for you.
Rich

That's great Rich! I wasn't sure how this was going to happen, but its sure going great. Thank you.:cheers:

[A26B]

Anybody else have some laying around? More still needed.

[Scrrem]

Jerry,
I got 4 heads worth of bolts out in the mail to you today, you should have them Tue or Wed.
Cheers
Rich

[efnfast]

Mine are still installed, but the SS are standing by. Sorry Jerry, you'll have to wait.

[A26B]

Jerry,
I got 4 heads worth of bolts out in the mail to you today, you should have them Tue or Wed.
Cheers
Rich

Bill,
Bolts received & check is in the mail. Bolts are in excellent condition. Thank you very much.

[PhillipsLT5]

Got em out, What is best/cheapest method of shipping?

[GOLDCYLON]

Got em out, What is best/cheapest method of shipping?

parcel post

[PhillipsLT5]

Well, We can lighten it a bit! :cheers:
Bolts sent today

[-=Jeff=-]

Jerry,

Are you still in need of more bolts?

[XfireZ51]

Jerry,

Found my complete set, 48+6

[A26B]

Jerry,

Are you still in need of more bolts?
Absolutely!!

[A26B]

Jerry,

Found my complete set, 48+6
Great!! Send them my way please.

[GOLDCYLON]

Sorry Jerry I gave all mine away at rebuild time. I thought I had kept them but no :(:(

[-=Jeff=-]

I need to go dig them out

[A26B]

Mine are still installed, but the SS are standing by. Sorry Jerry, you'll have to wait.

:cheers: Don't forget about it! I am ready when you are. :dancing

Many more cam cover bolts needed.