WTB LT5 Ignition Module

[Jagdpanzer]

Looking for a LT5 ignition module - GM part# 1103841
Last major part needed for the 402 CID stroker build.

[LGAFF]

http://jerrysgaskets.com/store2/root/index.php?main_page=product_info&cPath=2_22&products_id=493

1 left

I know someone else who has some from the plant

[Jagdpanzer]

Thanks Lee, I'm aware of this one at Jerry's but was hoping to find a latter 1103841 production one.

[LGAFF]

Thanks Lee, I'm aware of this one at Jerry's but was hoping to find a latter 1103841 production one.

Oh you want to keep the 402 as original as possible, got it:icon_scra

[ScottZ95ZR1]

Sent you a PM on the other forum, Phil.

[LGAFF]

Is there a difference in the actual module....quality, pins, etc?

[WVZR-1]

Is there a difference in the actual module....quality, pins, etc?

I'd think there must have been. The original preproduction ICM required an air-gap of something near .070 at the crank sensor I believe. That was accomplished with various thickness specialty shims. These early ICM's were reportedly used in only the first 500 production cars.

The early ICM was never offered as a service part. If an ICM failed it got the newer and the crank sensor's air-gap was adjusted

Whose got #501?