PDA

View Full Version : Loctite 262

LGAFF
06-12-2011, 12:18 PM
Can't find it can I use 271, where it calls for 262 or will that be too strong?
A26B
06-12-2011, 12:32 PM
See if you can find Loctite 263. It's the same strength as 262, except that it already has primer.

I'm in the process of becoming approved as a jobber for Loctite and will be listing 242/3 & 262/3 on the website. A couple of the guys at BG told me it was a pain to find and run around to get it.....suggested that i keep it in stock as a convenience item.
LGAFF
06-12-2011, 01:21 PM
No luck on 263, will check with my machinist on Monday
lbszr
06-12-2011, 01:37 PM
No luck on 263, will check with my machinist on Monday

This is the company I purchased some a few years ago.

http://applied.findlocation.com/results.aspx
lbszr
06-12-2011, 01:45 PM
They might not have 262 anymore, but here's the 263 that A26 mentions.



http://www.applied.com/apps/commerce/catalog/catalog.do
Jagdpanzer
06-12-2011, 01:56 PM
I get 262 at my local Fastenal store

http://www.fastenal.com/web/products/detail.ex?sku=62404&ucst=t


http://img0.fastenal.com/productimages/62405_hr4c.jpg
bdw18_123
06-12-2011, 03:20 PM
I got my 262, 242, 565 & 518 (substitute for Permabond A136) from a couple of companies selling through Amazon.
RICHARD TILL
06-13-2011, 01:39 AM
I`ve got two nearly full bottles. 1.69 fl. oz. They use it on each little job where i work and leave the remainder of the bottle to be thrown away. Thats when i come into the picture. If you don`t have any luck finding any, let me know and i`ll mail you one of em.
LGAFF
06-13-2011, 05:33 PM
Thanks for the offer; got the last bottle at Fastenal store

Thanks Phil!
HAWAIIZR-1
06-14-2011, 10:10 AM
I see you have it resolved, but for what it is worth, here is the answer I received when I had a problem finding 262 in Hawaii. This is from Loctite Tech USA Industrial Dept:

Craig,

Loctite 262 is approximately 40% less strength in both breakaway and prevailing strength than Loctite 271 on steel fasteners. The fixture time is a little longer with Loctite 271 vs 262, 10 minutes and 5 minutes respectively. The viscosity is lower with Loctite 271 than 262, 500 cps vs 1850cps. Other than that the temperature , gap filling and sizes of fasteners are about the same. Hope this has helped you.

Take Care,

Tom Kosloski