Little White hose Clip thingy

[LGAFF]

Any else missing the little white hose clamp thingy that is over by the radiator cap/PS I believe it holds a vac line....I am going to try and make them.....just seeing if anyone else has the need before I start this project

Its the Vac tube clip that attaches to the small coolant tube that bolts to the plenum, will post pics later

[bdw18_123]

I believe this is what you are talking about, Lee (red arrow):

http://i13.photobucket.com/albums/a292/bdw18_123/91ZR-1LT5Pside.jpg


Only the 91-95 ZR-1's have this. The 90 ZR-1's don't (see pic below). Does anyone know what this extra vacuum line is for that they added?

http://i13.photobucket.com/albums/a292/bdw18_123/90LT5Pside5.jpg

[LGAFF]

Thats it!

[XfireZ51]

I'll take one. While you're at it, make the black clip that holds the fuel lines bolted to the evaporator case.

[ZR1@gmx.com]

I'll take one. While you're at it, make the black clip that holds the fuel lines bolted to the evaporator case.
I would like one of each!

[4DSZR1]

Id take at least 3

:cheers:

Rick

[Brillo1990]

While you're at it Lee make some of the spark plug wire holders on the rear, I broke one of mine last week. :mrgreen:

[DaveK]

I'll take a couple - mine is all loose and keeps popping out... errrr.... [-X

[zr1don]

I believe that is a clip for the vacume line that goes to the charcoal canister for the fuel tank vapor recovery system on the later model LT5's. On the 90 that line comes out behind the A/C compressor and goes to the charcoal cannister under the left headlight.

[ScottZ95ZR1]

Please put me down for a couple, Lee.

[limey]

Put me down for 10.

[mike100]

91's have that...mine's broke too. If you make 50 pcs, that probably wouldn't be enough.

[Emilee]

I'll take a couple

[VetteVet]

I'll take two, Lee.

Thanks,
Jep

[LGAFF]

Well I have been working on a mold for this clip....then today I am out in the garage and my neightbor asks me to help him with an issue he is having with his Acura. We finish up, and as I close the hood, I go to put the prop back, and there is a nearly identifical clip. Thats why the white clip does not seem to match the LT-5 Engine compartment...its judt a hood clip

So I just need to find the correct hood prop clip....

http://www.thefastenerconnection.com/Products/HoodPropRodClips.html


This one looks close

PN#: 14345
Colour: Nylon (white)
Holds Rod Dia: 10mm
Fits Hole Dia: 8mm
Hood Prop Rod Clip
OEM#: 24220-89986

[GOLDCYLON]

Lee been a while did this ever happen I need a few of these. GC

[LGAFF]

I am pretty sure its just a hood prop clip sourced from another car....did not find it....

[LGAFF]

Close....not sure on size...

http://www.ebay.com/itm/Mazda-Ford-New-Hood-Prop-Rod-Stay-Clip-2001-To-2012-/230653464611

This one looks close too

http://www.ebay.com/itm/Toyota-Pickup-Truck-Tacoma-4Runner-Etc-HOOD-PROP-ROD-HOLDER-CLIP-/370680576708?pt=Motors_Car_Truck_Parts_Accessories&hash=item564e48bac4&vxp=mtr

[WVZR-1]

What is the diameter of the tube and also the hole where the clip is fastened? If your vernier does metric it's generally easier to work with metrics these days.

Hood prop rods are generally larger than I believe required. I'm quite sure I did a GM number for these once but they've been NLA for a while.

[GOLDCYLON]

Does anybody have a close up pic of this actual part. I want to look at Ace and a few help sections.

[Z51JEFF]

I took mine off before it fell off.What I did was took a black wire tie,looped it from the bottom with just the loop coming up through the hole in the bracket and wrapped that around the VAC line.