Two new test fit windshields available (seconds)

[dredgeguy]

As announced during Carlisle, the Registry has been working with the original windshield manufacturer to replenish the stock of ZR-1 windshields, both large and small cutout. There are 2 available in Westminster, MD with the large cutout (early years) to whomever wants to come pick up...no charge. Note it was discovered that the location of the opening for the VIN number is about 1/2 high (see picture attached) on both windshields. You can still see the VIN when the windshield is installed. One of the two available windshields also has a very minor air bubble in the glass on the passenger side tint, hard to see unless you are looking for it and as we were in charge of QC, we were looking!


So while they are not 100% perfect, they are free to the first 2 who post up and are able to pick them up from Westminster, MD. We are still waiting for the release of the corrected units to Safelite. I understand they will make 30 each of the large and small cutouts in the first batch so keep in contact with your local Safelite.

[zyal8r]

Thanks for posting Charlie! Glad to see more movement. I need the small cutout for my ?95, but would jump on it if I had a ?90-?92! I?m just set on having mine correct in that respect.

Thanks!
Mike

[dredgeguy]

Mike, your pain should be over soon.

[wfot]

I will take the one without the bubble please. I have a 1994, but but my windshield is cracked so I need one.

thank you very very much
when and where do I go to get it?

John

[dredgeguy]

John, PM me your phone number

[bob@tradeshowconsulting.c]

Im in Georgia ..wish I could come pick-up for my 1993 .. However, glad to see some movement on this , Hoping Safelite has some available soon



Thanks for posting !

[Mikey]

Originally Posted by wfot

I will take the one without the bubble please. I have a 1994, but but my windshield is cracked so I need one.

thank you very very much
when and where do I go to get it?

John

please consider actually joining the registry!

[Mikey]

Originally Posted by dredgeguy

As announced during Carlisle, the Registry has been working with the original windshield manufacturer to replenish the stock of ZR-1 windshields, both large and small cutout. There are 2 available in Westminster, MD with the large cutout (early years) to whomever wants to come pick up...no charge. Note it was discovered that the location of the opening for the VIN number is about 1/2 high (see picture attached) on both windshields. You can still see the VIN when the windshield is installed. One of the two available windshields also has a very minor air bubble in the glass on the passenger side tint, hard to see unless you are looking for it and as we were in charge of QC, we were looking!


So while they are not 100% perfect, they are free to the first 2 who post up and are able to pick them up from Westminster, MD. We are still waiting for the release of the corrected units to Safelite. I understand they will make 30 each of the large and small cutouts in the first batch so keep in contact with your local Safelite.

Charlie, I didn't see photos attached to your post. I've got a friend in Westminster who could pickup, but I'm not sure how I'd get it back to TN so I'll hold off on requesting one for now.

Is there a P/N to give Safelite when trying to order (when available)?

Thanks for your efforts!

Mike

[dredgeguy]

Hi Mike, I do not have a P/N but somebody else checked with their Safelite and was told they were listed as pending in their system. For all those who are interested, please be sure you are a member in good standing and renew your membership if you have not already done so.

[dredgeguy]

This is a picture of the opening for VIN, it is a 1/2 low.