Change Oil Light Reset Procedure

[TFENT]

Hey Guys:

I looked all over for the oil change reset procedure and even looked in the maintenance section and I still can't find the procedure to reset the light.

Can someone post it for me please?? TY!

[rebelz]

Key on, Engine off.
Press ENG MET within 5 second press it again.
Press and hold GAUGES button. CHANGE OIL light will flash.
Hold until CHANGE OIL light stops flashing. When it stops it is reset,
Rich

[TFENT]

Thank u!!!!

[rebelz]

yw!

[TFENT]

OK where is the gauges button?? Its a 1990.

Yep they changed things around a little starting in 92 button wise.

[1990 415]

for 1990 :1. key on, engine off
2. press ENG MET and release. within 5 seconds press and release ENG MET again.
3. within 5 seconds of step 2 press and hold RANGE button. the CHANGE OIL light will flash.
4. hold RANGE button until CHANGE OIL light stops flashing and goes out.

[TFENT]

Thank u!

[gbrtng]

The procedure is in the owner's manual.

[batchman]

Any clues on how to proceed if this doesn't work?

I've tried every timing possible on the two hits to ENG/MET and can't get a flashing "CHANGE OIL", just stays steady.

Thanks,
- Jeff

[GOLDCYLON]

Originally Posted by batchman

Any clues on how to proceed if this doesn't work?

I've tried every timing possible on the two hits to ENG/MET and can't get a flashing "CHANGE OIL", just stays steady.

Thanks,
- Jeff

Did you hit the range button and hold which is the final button for the procedure on your 91?