Header exhaust install ? - ZR-1 Net Registry Forums

ukengr93 · 10-29-2019

Likely going to install long tube headers to b&b fusion exhaust on my ‘95. For headers haven’t decide yet on brand. Assuming SW headers...is this a plug and play installation at the connection points between headers and exhaust allowing me to do myself? Or, is custom pipe fab/weld work needed?

I searched high and low and learned a lot about header install pain points but didn’t see anything on this.

Thx in advance for help.

Demps · 10-29-2019

The right combo bolts right up. You will have the EGR connection to deal with if you leave it connected. Also, AIR upstream components will need to be squared away. Talk to Paul Workman here and get an oil dipstick bracket. I’d get some appropriate header bolts too. May need O2 relocation harness (Summit). Get a Haibeck chip tailored for headers with anti-backfire.

That sounds sporty but it’s not that bad.

Ted

z proud · 10-29-2019

Plug and play, slip fit ... should have been a install on the form as we had a group buy,,,, a few years ago ( 5 to 10]. I did the cats from stainless works with the long tubes and it was plug and play to Corsa ... I would question stainless works, I also did the air tubes for the injection air system.

jss06c6 · 10-29-2019

I've installed numerous Stainless Works Headers on ZR-1's, LT-1's and LT-4. They are, in my experience, the best fitting system. Pairing with Corsa Sport is a killer combo. You can also pair up with SW 3" exhaust.

If you're decent with a wrench, you can definitely do this work.

Sent from my SM-G950U using ZR-1 Net Registry mobile app

ukengr93 · 10-30-2019

Thanks to all of you for your feedback. About the only thing I don't have in my arsenal yet is welding capability (yet) & sounds like that is not an obstacle. So, you answered my question & more. Much obliged.

Ccmano · 10-30-2019

FYI the Registry offers a 25% discount on Stainless Works products to members.
PM me and let me know what you want and I can get you a quote.
H

Jagdpanzer · 10-30-2019

Here are a couple of photos of the SW long tubes connected to a Corsa exhaust via Vibrant 3” cats, V-band quick disconnect clamps, and, Vibrant SS flex joints.
IMG_0480.JPG
IMG_0492.JPG

Sent from my iPhone using ZR-1 Net Registry

10-29-2019	#1
ukengr93 Join Date: Aug 2019 Location: Lebanon, OH Posts: 8	Header exhaust install ? Likely going to install long tube headers to b&b fusion exhaust on my ‘95. For headers haven’t decide yet on brand. Assuming SW headers...is this a plug and play installation at the connection points between headers and exhaust allowing me to do myself? Or, is custom pipe fab/weld work needed? I searched high and low and learned a lot about header install pain points but didn’t see anything on this. Thx in advance for help.

10-29-2019	#2
Demps Join Date: Jan 2006 Location: Niceville Posts: 997	Re: Header exhaust install ? The right combo bolts right up. You will have the EGR connection to deal with if you leave it connected. Also, AIR upstream components will need to be squared away. Talk to Paul Workman here and get an oil dipstick bracket. I’d get some appropriate header bolts too. May need O2 relocation harness (Summit). Get a Haibeck chip tailored for headers with anti-backfire. That sounds sporty but it’s not that bad. Ted

10-29-2019	#3
z proud Join Date: Aug 2005 Location: Pa Posts: 114	Re: Header exhaust install ? Plug and play, slip fit ... should have been a install on the form as we had a group buy,,,, a few years ago ( 5 to 10]. I did the cats from stainless works with the long tubes and it was plug and play to Corsa ... I would question stainless works, I also did the air tubes for the injection air system.

10-29-2019	#4
jss06c6 Join Date: Aug 2015 Location: Magnolia, Texas Posts: 884	Re: Header exhaust install ? I've installed numerous Stainless Works Headers on ZR-1's, LT-1's and LT-4. They are, in my experience, the best fitting system. Pairing with Corsa Sport is a killer combo. You can also pair up with SW 3" exhaust. If you're decent with a wrench, you can definitely do this work. Sent from my SM-G950U using ZR-1 Net Registry mobile app

10-30-2019	#5
ukengr93 Join Date: Aug 2019 Location: Lebanon, OH Posts: 8	Re: Header exhaust install ? Thanks to all of you for your feedback. About the only thing I don't have in my arsenal yet is welding capability (yet) & sounds like that is not an obstacle. So, you answered my question & more. Much obliged.

10-30-2019	#6
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Header exhaust install ? FYI the Registry offers a 25% discount on Stainless Works products to members. PM me and let me know what you want and I can get you a quote. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

10-30-2019	#7
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,657	Re: Header exhaust install ? Here are a couple of photos of the SW long tubes connected to a Corsa exhaust via Vibrant 3” cats, V-band quick disconnect clamps, and, Vibrant SS flex joints. IMG_0480.JPG IMG_0492.JPG Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake