A question about replacement rubber vacuum hoses (to cruise solenoid) - ZR-1 Net Registry Forums

Meanmyz · 10-26-2020

I noticed that one of my cruise control vacuum hoses (the vacuum side going to the vacuum tank), is starting to show some age. The last time I took my car out, the cruise control would not work and this is probably a good place to start.

The originals were GM hoses with GM markings on them. I am going to make the assumption that there is no such thing as far as GM labeled rubber hoses as far as replacements and that the closest thing available will be what the local auto parts store has available. Is this the correct assumption???

Thank you in advance for any answers!

WARP TEN · 10-27-2020

I would certainly check with Jerry (Jerry's Gaskets) and Marc H to see what the best sources for hoses are. Maybe Jerry carries them. --Bob

Meanmyz · 10-27-2020

Thanks. Regardless if Jerry does or doesn't have them, I should have checked there before posting. I will check it out!

Thanks!

10-26-2020	#1
Meanmyz Join Date: Feb 2006 Location: Springfield, Minnesota Posts: 446	A question about replacement rubber vacuum hoses (to cruise solenoid) I noticed that one of my cruise control vacuum hoses (the vacuum side going to the vacuum tank), is starting to show some age. The last time I took my car out, the cruise control would not work and this is probably a good place to start. The originals were GM hoses with GM markings on them. I am going to make the assumption that there is no such thing as far as GM labeled rubber hoses as far as replacements and that the closest thing available will be what the local auto parts store has available. Is this the correct assumption??? Thank you in advance for any answers! Last edited by Meanmyz; 10-26-2020 at 06:17 PM. Reason: clarity and length

10-27-2020	#2
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,084	Re: A question about replacement rubber vacuum hoses (to cruise solenoid) I would certainly check with Jerry (Jerry's Gaskets) and Marc H to see what the best sources for hoses are. Maybe Jerry carries them. --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"

10-27-2020	#3
Meanmyz Join Date: Feb 2006 Location: Springfield, Minnesota Posts: 446	Re: A question about replacement rubber vacuum hoses (to cruise solenoid) Thanks. Regardless if Jerry does or doesn't have them, I should have checked there before posting. I will check it out! Thanks!