ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings
Reload this Page Can’t reset ride control codes
Register FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
Old 09-09-2014   #1
ghlkal
 
ghlkal's Avatar
 
Join Date: Jan 2012
Location: Wisconsin
Posts: 887
Default Can’t reset ride control codes
Driving around Bowling Green with the NCM anniversary, my Service Ride Control light came on. I was just cruising on the freeway and said “darn.” The next day, also just cruising steady on the freeway, the light went off. I love it when things fix themselves J

When I got home, I jumpered pins A and C on the ALDL to see what ride control codes were stored. I got every code! What? Mind you, the light isn’t on, so I guess this must be “history” or something.

I disconnected the battery and still had the same result – all codes.

I followed the reset procedure in the FSM (ground pin C for two seconds and repeat the process a total of three times), and still had the same result – all codes.

This is the same issue rogerzr1 had here
http://www.zr1.net/forum/showthread....t+ride+control
there’s no resolution listed in the thread L

Any ideas?

Gary
__________________
1990 ZR-1 #2180 Red/Black
Many of the usual mods for 460HP, tuned by Marc Haibeck
ZR-1 Net Registry Member #1548
ghlkal is offline   Reply With Quote
Old 09-09-2014   #2
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Can’t reset ride control codes
Quote:
Originally Posted by ghlkal View Post
Driving around Bowling Green with the NCM anniversary, my Service Ride Control light came on. I was just cruising on the freeway and said “darn.” The next day, also just cruising steady on the freeway, the light went off. I love it when things fix themselves J

When I got home, I jumpered pins A and C on the ALDL to see what ride control codes were stored. I got every code! What? Mind you, the light isn’t on, so I guess this must be “history” or something.

I disconnected the battery and still had the same result – all codes.

I followed the reset procedure in the FSM (ground pin C for two seconds and repeat the process a total of three times), and still had the same result – all codes.

This is the same issue rogerzr1 had here
http://www.zr1.net/forum/showthread....t+ride+control
there’s no resolution listed in the thread L

Any ideas?

Gary

When the SRC light comes on again then pull the codes. It should not be ALL the codes. Did you change the shocks recently?
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 09-10-2014   #3
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Can’t reset ride control codes
Quote:
Originally Posted by ghlkal View Post
Driving around Bowling Green with the NCM anniversary, my Service Ride Control light came on. I was just cruising on the freeway and said “darn.” The next day, also just cruising steady on the freeway, the light went off. I love it when things fix themselves J

When I got home, I jumpered pins A and C on the ALDL to see what ride control codes were stored. I got every code! What? Mind you, the light isn’t on, so I guess this must be “history” or something.

I disconnected the battery and still had the same result – all codes.

I followed the reset procedure in the FSM (ground pin C for two seconds and repeat the process a total of three times), and still had the same result – all codes.

This is the same issue rogerzr1 had here
http://www.zr1.net/forum/showthread....t+ride+control
there’s no resolution listed in the thread L

Any ideas?

Gary
As it happens, I'm fussing with an intermittent SRC as well. Thought I had if fixed, but it returned the following day. Not having your particular issue with attempting to clear codes, but let's keep in touch. If I discover anything along the way, I'll be sure to let ya know what I find!
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 09-10-2014   #4
ghlkal
 
ghlkal's Avatar
 
Join Date: Jan 2012
Location: Wisconsin
Posts: 887
Default Re: Can’t reset ride control codes
Quote:
Originally Posted by GOLDCYLON View Post
When the SRC light comes on again then pull the codes. It should not be ALL the codes. Did you change the shocks recently?
No light on right now, and I haven't changed anything.

Quote:
Originally Posted by Paul Workman View Post
As it happens, I'm fussing with an intermittent SRC as well. Thought I had if fixed, but it returned the following day. Not having your particular issue with attempting to clear codes, but let's keep in touch. If I discover anything along the way, I'll be sure to let ya know what I find!
Thanks Paul
__________________
1990 ZR-1 #2180 Red/Black
Many of the usual mods for 460HP, tuned by Marc Haibeck
ZR-1 Net Registry Member #1548
ghlkal is offline   Reply With Quote
Old 09-10-2014   #5
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Can’t reset ride control codes
Selective Ride Control Solution TIPS

The FX3 shock actuator deterioration can cause all sorts of intermittent problems

FX3 Selective Rid Control TIPS
Last edited by Dynomite; 09-10-2014 at 01:14 PM.
Dynomite is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 04:06 AM.

Contact Us - ZR-1 Net Registry - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020