![]() |
#1 |
Join Date: Feb 2021
Location: MO
Posts: 12
|
![]()
I have a 94 ZR1 and I am trying to reset the selective ride control code dash light. I have read that I need to jump pin 3 and 4. Does someone have a schematic or step by step how to reset the light? Thanks!
|
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Sep 2008
Location: Speedway, IN
Posts: 126
|
![]()
Sometimes the check at start up is a bit slow as the system looks for the shock actuators to fully cycle. When I start my 91, I turn the key on, but do not start it until the SRC light goes out.
Sent from my iPhone using ZR-1 Net Registry |
![]() |
![]() |
![]() |
#3 | |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,712
|
![]() Quote:
Also, if the ignition is turned on more than 5-6 times (not sure of exact number) without moving, SRC will light up. |
|
![]() |
![]() |
![]() |
|
|