Rear hatch release - won't - ZR-1 Net Registry Forums

conesare2seconds · 08-17-2017

Hi everyone. My rear hatch won't release when the switches are actuated. The electric popper will try to release the glass once, mayyyyybe twice, then it gives up until it has rested and the car has restarted at least once. I was able to open the hatch for a time by pressing down on the glass while actuating a release switch but that method no longer works.

I'd like to adjust or repair the mechanism or at least attach a release cable but until I can get the hatch open there is no access to the surround trim, which I'm pretty sure has to be removed to pull down the carpet and access the popper. Any suggestions?

gbrtng · 08-17-2017

there is a manual release cable ... it's probably hidden under the vertical carpeting ... see your owner's manual.

Bruce · 08-18-2017

"gives up until it has rested" sounds like your release solenoid is on its way out, the switch is worn or the battery is buggered. Yes, it could be just an adjustment but the 'giving up till its rested' makes me think otherwise.

conesare2seconds · 08-18-2017

Agreed. Replacement solenoid is on the way.

conesare2seconds · 09-19-2017

Topic close out: picked up a used solenoid off eBay from a well-known Corvette recycler. Installed it tonight, problem solved. Appreciate the advice and suggestions.

jss06c6 · 09-20-2017

Good info. A replacement solenoid may be a valuable "shop stock" item!

Sent from my QTAIR7 using ZR-1 Net Registry mobile app

GOLDCYLON · 09-20-2017

Sometimes installing rubber vacuum nipple over the striker rod gives enough height for the solenoid to work.

08-17-2017	#1
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 484	Rear hatch release - won't Hi everyone. My rear hatch won't release when the switches are actuated. The electric popper will try to release the glass once, mayyyyybe twice, then it gives up until it has rested and the car has restarted at least once. I was able to open the hatch for a time by pressing down on the glass while actuating a release switch but that method no longer works. I'd like to adjust or repair the mechanism or at least attach a release cable but until I can get the hatch open there is no access to the surround trim, which I'm pretty sure has to be removed to pull down the carpet and access the popper. Any suggestions?

08-17-2017	#2
gbrtng Join Date: Feb 2006 Location: San Antonio area Posts: 1,179	Re: Rear hatch release - won't there is a manual release cable ... it's probably hidden under the vertical carpeting ... see your owner's manual. __________________ “Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer

08-18-2017	#3
Bruce Join Date: May 2016 Location: Whangarei New Zealand Posts: 29	Re: Rear hatch release - won't "gives up until it has rested" sounds like your release solenoid is on its way out, the switch is worn or the battery is buggered. Yes, it could be just an adjustment but the 'giving up till its rested' makes me think otherwise.

08-18-2017	#4
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 484	Re: Rear hatch release - won't Agreed. Replacement solenoid is on the way.

09-19-2017	#5
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 484	Re: Rear hatch release - won't Topic close out: picked up a used solenoid off eBay from a well-known Corvette recycler. Installed it tonight, problem solved. Appreciate the advice and suggestions.

09-20-2017	#6
jss06c6 Join Date: Aug 2015 Location: Magnolia, Texas Posts: 884	Re: Rear hatch release - won't Good info. A replacement solenoid may be a valuable "shop stock" item! Sent from my QTAIR7 using ZR-1 Net Registry mobile app

09-20-2017	#7
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,154	Re: Rear hatch release - won't Sometimes installing rubber vacuum nipple over the striker rod gives enough height for the solenoid to work. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V