![]() |
#1 |
![]() Join Date: Oct 2010
Location: Rock Hill, SC
Posts: 160
|
![]()
At the Gathering we were itroduced to the Ram Dual Disc Clutch.
http://www.ecklerscorvette.com/corvette-clutch-kit-ram-dual-9-5-disc-lt5-1990-1993.html I heard several people have already installed these in their cars. My questions are: 1. How does it compare to the traditional GM clutch setup? 2. How was the install? 3. Would you recommend the dual disc or the Ram single disc for a stock engine that is taken to the track from time to time? 4. Streetablity of the Dual disc? I quess what I'm really saying is for the guru's to give me some pros and cons so that I won't have to be the quinea pig here. I know the company is reputable, the design is sound, I like the hydraulic throw out bearing vs the fork and weight loss, although I really would prefer a manual clutch. ![]() It is JMHO but this type of setup will have to be the way of the future for our cars due to the problems we have in the bellhousing area. TIA Jeff
__________________
'93 #166 Black Rose “Out of every one hundred men, ten shouldn't even be there, eighty are just targets, nine are the real fighters, and we are lucky to have them, for they make the battle. Ah, but the one, one is a warrior, and he will bring the others back.” Heraclitus |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Dec 2005
Location: Huntley IL
Posts: 170
|
![]()
the single disc will be just fine for a stock lt5 . will also work well with a top end ported 350 .the stock clutch is junk the pull type pressure is not flat so it only rides on about 1/3 of the disc after thousands of miles it will ware in o work so so . the 9.5 dual disc is the best it will probably be the last clutch you will ever buy for the lt5
|
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Oct 2010
Location: Rock Hill, SC
Posts: 160
|
![]()
That was my thinking on look at it. But interested in the installation of the throw out bearing alignment shaft to the transmission?
__________________
'93 #166 Black Rose “Out of every one hundred men, ten shouldn't even be there, eighty are just targets, nine are the real fighters, and we are lucky to have them, for they make the battle. Ah, but the one, one is a warrior, and he will bring the others back.” Heraclitus |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
|
![]()
I really like my Stage 3 from Carolina Clutch
http://www.carolinaclutch.com/Conten...te-lt.htm.aspx Plus I went with a alum. Fidanza http://www.carolinaclutch.com/ShowIt...0Flywheel.aspx but be ready for the syncro gear rattle since the dual mass is gone.
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Dec 2005
Location: Huntley IL
Posts: 170
|
![]()
the bolt is supplied with the bearing all You need to do is drill a 1 inch to a1 1/4 inch hole in the bellhousingat about 4 o clock, there is a nice flat spot there, this allows you to stick a screwdriver in and line up the bearing
|
![]() |
![]() |
![]() |
#6 |
![]() ![]() Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
![]()
Bob, is the ram clutch too stiff at the pedal for comfortable street driving?
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
![]()
Brett,it's a bit firmer but very precise feel,the stock clutch is way too soft.
I have a dual disc Ram in my Z and just love it,it's the best clutch set up i've ever had. ![]() I'm very happy with it. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
![]() |
![]() |
![]() |
#8 | |
![]() ![]() Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
![]() Quote:
Pete, if I don't make it to Chicago by the drag race weekend, maybe I can try yours out (not on the track, LOL)?
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
![]() |
![]() |
![]() |
#9 | |
![]() Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
|
![]() Quote:
How long have you had your in?
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln |
|
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
![]()
Bryan,i've had this for about a year,it replaced my old Stage 3 set up, i hated driving the Stage 3 in traffic too grabby, this dual disc holds the power and drives like a stocker.
For the extra little bit of money you get new aluminum flywheel, 2 clutch discs,throw-out bearing and all the hardware needed to finish the job. Brett,you can test drive anytime you want brotha. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
![]() |
![]() |
![]() |
|
|