|
08-11-2022
|
#1 |
|
Join Date: Aug 2022
Location: california
Posts: 3
|
Leaky cam position advice
Just starting a plenum pull to do injectors and starter, and I notice I have a oil leak at what I believe to be the cam position sensor but I am having a hard time finding a replacement any recommendation where to find one. Thanks
|
|
|
|
08-11-2022
|
#2 |
 
Join Date: Sep 2016
Location: Ocala, FL
Posts: 894
|
Re: Leaky cam position advice
Pull it out, clean area. Remove o ring carefully. Wrap Teflon tape around in the o ring groove. Reassemble. You have enough Teflon when it is snug to push it in. Do a search there is also a NAPA part number for a replacement O ring. Be careful. The cam sensor is hens teeth unavailable.
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
|
|
|
|
08-11-2022
|
#3 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,193
|
Re: Leaky cam position advice
Match up the O ring at the auto parts store, I think I used an Oring from a GM AC kit
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
08-12-2022
|
#4 |
Join Date: Jan 2021
Location: Beautiful Bavaria
Posts: 523
|
Re: Leaky cam position advice
Mine had a crack. Because of what it is and where it is I don't think there is a durable fix. Though some reported good results with JB weld.
Phil (Jagdpanzer) provided a replacement. The picture shows both parts, old and new. DSC_0015.jpg
__________________
ZR-1 #638/1991 |
|
|
|
 |
|
|
Linear Mode
