|
03-20-2011
|
#1 |
|
Join Date: Feb 2011
Location: Medford, NJ
Posts: 77
|
WTB: Suspenssion bushnigs and Actuator Cups
I'm specifically looking for two actuator retainer cups that the actuators mount into, and all of the front and rear rubber bussings and washers. Please name your price. If you know any place that sells these, please let me know. I can't seem to find them anywhere.
Thanks -Gary |
|
|
|
03-20-2011
|
#2 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
|
Re: WTB: Suspenssion bushnigs and Actuator Cups
Can you take a photo of the actuator cup? I'm not sure what you are referring to.
I recommend that you contact Doug or Randy. Doug is a real guru for suspension. http://dougrippie.com/
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
03-20-2011
|
#3 | |
|
Join Date: Feb 2011
Location: Medford, NJ
Posts: 77
|
Re: WTB: Suspenssion bushnigs and Actuator Cups
Hey Jerry, you can see at it this link below.
http://captainzcnc.com/id2.html I checked out Doug's site, and it looks like he only has the poly bushings listed on his site. I'll call them tomorrow. I'm not sure who Randy is, sorry. Does he have a website? Quote:
|
|
|
|
|
|
03-20-2011
|
#4 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
|
Re: WTB: Suspenssion bushnigs and Actuator Cups
also, Vette Brake Products in Fla.
|
|
|
|
|
03-20-2011
|
#5 |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,393
|
Re: WTB: Suspenssion bushnigs and Actuator Cups
OK! I was in the bushing mode & never thought about the shocks.
Randy is Doug's son. If you are looking for stock replacement bushings, ball jts, etc. here's the best place. http://www.corvetterecycling.com/category_s/23.htm A complete set of NOS upper & lower control arms, complete with bushings & ball joints already installed for $400.00. NOS sway bar bushings Doug Asay is a stand-up guy and has a lot of NOS C4 chassis parts and new radiators.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
03-20-2011
|
#6 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: WTB: Suspenssion bushnigs and Actuator Cups
Those actuator cups are HTF although any FX-3 equipped car being parted out from MY 1989 - MY 1995 will have them. Most folks wont let them go without having to buy the entire shock as well. Make sure when you buy them you get pics of the top side inside the crown and the underside to make sure the guide dogs are present and the shock shaft rod guide slot has not been enlongated by a previous "Bad install". Just FYI GC
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
 |
|
|
Linear Mode
