![]() |
#1 |
![]() Join Date: Aug 2018
Location: Signal Mountain, TN
Posts: 5
|
![]()
I have a 91 ZR-1 that has only two screws to hold the plate. Is this standard or should there be four? Is there a PN for the original ones? Just curious and figured this would be the place to find out!
Ivey Sent from my iPhone using ZR-1 Net Registry |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,655
|
![]()
Should be 4 black Torx head screws with small washers.
They can be hard to find. Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,655
|
![]()
Corvette Central shows to have them in stock
https://www.corvettecentral.com/c4-8...c4%26count%3d9
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Aug 2018
Location: Signal Mountain, TN
Posts: 5
|
![]() |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,574
|
![]()
Phil's two posts are 100% correct!
Marty |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Oct 2017
Location: Tampa, FL / Rockledge, FL
Posts: 194
|
![]()
Now if the holes in the bumper are too large for the correct screws, you can take a plastic wall anchor (Grey or white is close to bumper color) and cut the flange and bottom off. Glue it in and use it as a sleeve. Don't ask me how I know this works. ;-)
Joel
__________________
Joel Tampa/Rockledge, FL Present Collection 1969 350/300 AC Convertible 1972 454 Coupe 2nd Owner 1988 KOH EX5006 - ZR-1 Prototype 1990 ZR-1 #277 NCRS Dave McLellan Award 2019 1994 Copper Convertible NCRS Dave Hill Award 2012 2001 Z06 122k miles ![]() |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Nov 2018
Location: Bartlett Illinois
Posts: 186
|
![]()
Corvette Central states 91-96, shouldn't it be 90-96?
|
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Oct 2017
Location: Tampa, FL / Rockledge, FL
Posts: 194
|
![]()
I use the same ones on my 90 that received a McClellan Mark of Excellence without a deduction for them. I did not get them from Corvette Central though
Screw Head Dia 0.305" Washer Dia 0.662" T15 (from memory)
__________________
Joel Tampa/Rockledge, FL Present Collection 1969 350/300 AC Convertible 1972 454 Coupe 2nd Owner 1988 KOH EX5006 - ZR-1 Prototype 1990 ZR-1 #277 NCRS Dave McLellan Award 2019 1994 Copper Convertible NCRS Dave Hill Award 2012 2001 Z06 122k miles ![]() |
![]() |
![]() |
![]() |
#9 | |
Join Date: Aug 2015
Location: Parts Unknown
Posts: 84
|
![]() Quote:
Hi Phil, These are the screws that hold the license plate itself in place, correct? Are there separate screws for the frame or does that basically fall off when you take the plate off? |
|
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,574
|
![]()
Plate and Frame use the same four screws, i.e. they go through both and go into the metal inserts on the bumper cover.
![]() Marty |
![]() |
![]() |
![]() |
|
|