ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > Corvette > Corvette Technical Questions

Reply
 
Thread Tools Display Modes
Old 08-07-2019   #1
Ls7/Ls9 Test Engineer
 
Ls7/Ls9 Test Engineer's Avatar
 
Join Date: Oct 2017
Location: Detroit
Posts: 68
Default Clicking from the Passenger side rear half shaft.

Hey all, it’s been a while.

I just started driving the Z last week after sitting for a while and I’m starting to notice a sharp clicking sound when I slowly let out the clutch and the car begins to move...
I’ve shocked the lugs and cannot seem to find any play in the half shafts

There is no vibration at any speed and the noise is only present during stop start in either direction..

Are there any known issues that could be causing this noise?

Thanks for any assistance...
Ls7/Ls9 Test Engineer is offline   Reply With Quote
Old 08-08-2019   #2
G-Sting
 
G-Sting's Avatar
 
Join Date: Apr 2015
Location: Kentucky
Posts: 363
Default Re: Clicking from the Passenger side rear half shaft.

One possibility - and a common problem - is the splines need de-rusting (brushing clean) and lubing. Here is a thread which may help, if that's the problem...

http://www.zr1.net/forum/showthread.php?t=25238

Cheers,
"G"
__________________
'94 ZR1 LT5 - Dark Red Metallic
'79 L82 4-speeds of fun
'96 LT1 Borla, H-pipe, TB, CAI (Sold)
"An adventure is only an inconvenience rightly considered. An inconvenience is only an adventure wrongly considered." -- G.K. Chesterton
G-Sting is offline   Reply With Quote
Old 08-09-2019   #3
HAWAIIZR-1
 
HAWAIIZR-1's Avatar
 
Join Date: May 2010
Location: Japan
Posts: 3,583
Default Re: Clicking from the Passenger side rear half shaft.

Quote:
Originally Posted by G-Sting View Post
One possibility - and a common problem - is the splines need de-rusting (brushing clean) and lubing. Here is a thread which may help, if that's the problem...

http://www.zr1.net/forum/showthread.php?t=25238

Cheers,
"G"

G,

That is exactly what fixed my passenger side clicking noise. I went ahead and did the driver’s side too while I was at it.



Sent from my iPhone using ZR-1 Net Registry
__________________
Craig
"ZR-1 NO KA 'OI"
"ZR-1 ICHIBAN"
1995 #228 Black/Black with Dunn Heads
ZR-1 owner since September 2003
ZR-1 Net Registry Founding Member #0074
NCM Lifetime Member #2048

HAWAIIZR-1 is offline   Reply With Quote
Old 08-09-2019   #4
G-Sting
 
G-Sting's Avatar
 
Join Date: Apr 2015
Location: Kentucky
Posts: 363
Default Re: Clicking from the Passenger side rear half shaft.

Quote:
Originally Posted by HAWAIIZR-1 View Post
G,

That is exactly what fixed my passenger side clicking noise. I went ahead and did the driver’s side too while I was at it.
Yes, not a difficult job, but takes a bit of time to do properly with the right tools.
__________________
'94 ZR1 LT5 - Dark Red Metallic
'79 L82 4-speeds of fun
'96 LT1 Borla, H-pipe, TB, CAI (Sold)
"An adventure is only an inconvenience rightly considered. An inconvenience is only an adventure wrongly considered." -- G.K. Chesterton
G-Sting is offline   Reply With Quote
Old 08-10-2019   #5
HAWAIIZR-1
 
HAWAIIZR-1's Avatar
 
Join Date: May 2010
Location: Japan
Posts: 3,583
Default Re: Clicking from the Passenger side rear half shaft.

Quote:
Originally Posted by G-Sting View Post
Yes, not a difficult job, but takes a bit of time to do properly with the right tools.

I agree G! If not for the help of members on forums, service manual, and YouTube I would have been afraid to tackle it. It was easy to do with all the resources we have available to us today.



Sent from my iPhone using ZR-1 Net Registry
__________________
Craig
"ZR-1 NO KA 'OI"
"ZR-1 ICHIBAN"
1995 #228 Black/Black with Dunn Heads
ZR-1 owner since September 2003
ZR-1 Net Registry Founding Member #0074
NCM Lifetime Member #2048

HAWAIIZR-1 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:43 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020