![]() |
#1 |
![]() Join Date: Dec 2020
Location: Sydney, Australia
Posts: 85
|
![]()
Hi guys
I'm looking at buying a 3.90 gearset and it is listed as having 7/16" ring gear bolts (instead of the standard 3/8" bolts). Am I correct in my understanding that the 7/16" bolts will fit in my 91? |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,653
|
![]()
If your differential carrier is original the ring gear bolt holes are for 3/8" bolts. The 3.90 gear set you are considering was intended for later Dodge Vipers that also came with Dana Super 44 rear ends with differential carriers drilled for 7/16" ring gear bolts. In your case if the dif is original easiest fix would be to have a machine shop ream out the carrier ring gear bolt holes to fit 7/16" bolts.
Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Dec 2020
Location: Sydney, Australia
Posts: 85
|
![]()
Thank you, that exactly answers my question. Much appreciated!
|
![]() |
![]() |
![]() |
|
|