![]() |
#1 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,653
|
![]()
Have to do some work on diver side window regulator. Anyone have some pointers on how to best remove the widow?
Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Jul 2016
Location: Greater St. Louis
Posts: 484
|
![]()
Following with interest. I need to repair or replace my DS regulator.
|
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Aug 2004
Location: Spring Grove ,Pa.
Posts: 255
|
![]()
Either use the GM shop manual or you can buy a CD. Take some pics to help you remember how things are. Another suggestion is you probably can find a video on youtube of someone working on the C4 window regulator. While I have not had to do any repairs to my current car, I did remove both regulators from my sons 98 Trans Am to replace the electric window motors.
I made myself two window props out of some wood scraps with a U-shaped notch for the bottom of the glass and put rubber anti slip pads on the part that rest against the bottom of door. I did this to give myself some room inside of the door and so I didn't need to remove the window. If you have to mess with the bolts that hold the front and rear window tracks its best to mark their positions with a scribe or pencil.
__________________
91 Turquoise Metallic Haibeck 525 #0134 |
![]() |
![]() |
![]() |
|
|