ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 05-29-2016   #1
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Dash and Tachissues

The dash, specifically the LCD, on my 90 is going haywire and sometimes off....also the Tach is off by 800-1000RPM. Alternator is producing 13.8 volts....battery is new.

Guess the wiring to the LCD is failing.
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 05-29-2016   #2
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: Dash and Tachissues

https://www.youtube.com/watch?v=4de76cWC-MY
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 05-29-2016   #3
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: Dash and Tachissues

http://batee.com/articles.html
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 05-29-2016   #4
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Dash and Tachissues

Tachometer Calibration TIPS
Use of Trim Pot for Tachometer Calibration TIPS
Tachometer repair

By the way Lee.....you can put all that in a single post by using Edit.
Also.....if you ever want to bring a thread back to the top....just Edit your last post, Copy content, and then Delete the post. Then paste what you copied in New Post......back to the top the Thread goes

Last edited by Dynomite; 05-29-2016 at 02:00 PM.
Dynomite is offline   Reply With Quote
Old 05-29-2016   #5
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Dash and Tachissues

Lee,

If you need a hand calibrating your tach, PM me. Love to help.

Paul.
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 06-01-2016   #6
jcruz
 
jcruz's Avatar
 
Join Date: Mar 2010
Location: Fort Myers, FL
Posts: 343
Default Re: Dash and Tachissues

Quote:
Originally Posted by LGAFF View Post
I had my IP repaired by Batee. Highly recommended.
__________________
1992 #043, Aqua/Gray 40k miles
jcruz is offline   Reply With Quote
Old 06-03-2016   #7
Vette Guy
 
Vette Guy's Avatar
 
Join Date: Jul 2005
Location: San Antonio, TX
Posts: 626
Default Re: Dash and Tachissues

Lee,

I had a similar problem on my L98 years ago - Glenn B advised that it might be a bad cell in my battery - Which I recall was a new battery. Sure enough, I switched batteries after checking connections and taking apart the cluster to look for obvious problems.... whala! Can't explain it, but never had another problem for the following 10 or so years.

Good luck,
Mark
__________________
Mark Horner
President, ZR-1 Net Registry
91 ZR-1 #2016
95 ZR-1 #21 DRM-600, LPE 385
Vette Guy is offline   Reply With Quote
Old 06-05-2016   #8
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: Dash and Tachissues

Both issues appear solved. The Tach is within 50rpm and no more dash issues....process was about 20 minutes to get it out; 1.5 hours of soldering, and I had to cut the plastic housing to get the Analog Calibration IC to fit. apprantly this is not needed on all housings

http://batee.com/corvette/dcrg/servi...c_adj_zr1.html

http://batee.com/corvette/dcrg/9096_analog_ic/
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020