Dr Color Chip - ZR-1 Net Registry Forums

Mystic ZR-1 · 04-25-2017

Anyone have any experience with using Dr Color Chip?

efnfast · 04-25-2017

yup. very pleased with it.

rush91 · 04-26-2017

Yes. I used it on my Polo Green '91....They matched the color perfect. You may have to go over deep nicks or scratches twice.

Z51JEFF · 05-03-2017

I e used it twice and both times they got the match wrong.

Billy Mild · 05-03-2017

I used it on my white car and it did a pretty decent job. Much easier than using traditional methods to fix nicks.

conesare2seconds · 05-04-2017

I've used it on a DD and my current ZR-1 with very good results, even over a large area on the DD. For really deep chips, consider using glazing putty first. The Dr. Color chip system will make a chip or scratch vanish is certain lighting, but the difference in surface level will be apparent in other lighting, even after a couple of coats. It could be that 5-6 coats will fill in entirely on horizontal surfaces, but vertical or more upright surfaces are still going to puddle due to gravity. Anyway, it's easy to use and I kind of enjoy the process.

Flyman 27 · 05-20-2017

I've used the product on 3 cars. Metal flake colors are usually hard to match with touch-up paint, but the DR system works well. Make sure you order only by the paint code on your build sticker, it's important. I applied several coats (after local cleaning with IPA) with a 1/4" wide detail flat brush (walmart art dept). Then carefully wet sanded with 2000 grit and polished it with a small 3" foam detail pad using maguire's polishing compound. You absolutely cannot tell where the scratches were.
It takes a little time to do right, but it was fun for me.

karlaw · 05-20-2017

Turtle Wax has a kit, with clear coat only. It comes with 3 tiny sanding pads, and a bottle of cleaner, and a bottle of paint clarifier. I just found it last nite in my garage, so will be trying it out on my black Duramax.

Sent from my iPhone using ZR-1 Net Registry

karlaw · 05-20-2017

Question: instead of Dr Color Chip, why not use those touch up bottles with the small brush in them, available at dealerships?

Sent from my iPhone using ZR-1 Net Registry

Flyman 27 · 05-20-2017

The ones from the dealership are thicker, almost like a paste. Very hard to work with. The DR is real automotive paint, flows easy, levels well and is easy to sand and finish if you are so inclined.
With a good quality brush, I have been able to repair scrapes about 1/4" x 4". The paint blends well with the original paint.

04-25-2017	#1
Mystic ZR-1 Join Date: Jan 2010 Location: Mystic CT Posts: 2,633	Dr Color Chip Anyone have any experience with using Dr Color Chip?

04-25-2017	#2
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,469	Re: Dr Color Chip yup. very pleased with it.

04-26-2017	#3
rush91 Join Date: Feb 2016 Location: Carterville Illinois Posts: 850	Re: Dr Color Chip Yes. I used it on my Polo Green '91....They matched the color perfect. You may have to go over deep nicks or scratches twice.

05-03-2017	#4
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,074	Re: Dr Color Chip I e used it twice and both times they got the match wrong.

05-03-2017	#5
Billy Mild Join Date: Aug 2014 Location: Kansas City, MO Posts: 838	Re: Dr Color Chip I used it on my white car and it did a pretty decent job. Much easier than using traditional methods to fix nicks. __________________ Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration

05-04-2017	#6
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 490	Re: Dr Color Chip I've used it on a DD and my current ZR-1 with very good results, even over a large area on the DD. For really deep chips, consider using glazing putty first. The Dr. Color chip system will make a chip or scratch vanish is certain lighting, but the difference in surface level will be apparent in other lighting, even after a couple of coats. It could be that 5-6 coats will fill in entirely on horizontal surfaces, but vertical or more upright surfaces are still going to puddle due to gravity. Anyway, it's easy to use and I kind of enjoy the process.

05-20-2017	#7
Flyman 27 Join Date: Apr 2017 Location: Wayne Illinois Posts: 402	Re: Dr Color Chip I've used the product on 3 cars. Metal flake colors are usually hard to match with touch-up paint, but the DR system works well. Make sure you order only by the paint code on your build sticker, it's important. I applied several coats (after local cleaning with IPA) with a 1/4" wide detail flat brush (walmart art dept). Then carefully wet sanded with 2000 grit and polished it with a small 3" foam detail pad using maguire's polishing compound. You absolutely cannot tell where the scratches were. It takes a little time to do right, but it was fun for me. Last edited by Flyman 27; 05-20-2017 at 07:52 PM.

05-20-2017	#8
karlaw Join Date: Jun 2008 Location: Alberta Posts: 85	Re: Dr Color Chip Turtle Wax has a kit, with clear coat only. It comes with 3 tiny sanding pads, and a bottle of cleaner, and a bottle of paint clarifier. I just found it last nite in my garage, so will be trying it out on my black Duramax. Sent from my iPhone using ZR-1 Net Registry __________________ LT5

05-20-2017	#9
karlaw Join Date: Jun 2008 Location: Alberta Posts: 85	Re: Dr Color Chip Question: instead of Dr Color Chip, why not use those touch up bottles with the small brush in them, available at dealerships? Sent from my iPhone using ZR-1 Net Registry __________________ LT5

05-20-2017	#10
Flyman 27 Join Date: Apr 2017 Location: Wayne Illinois Posts: 402	Re: Dr Color Chip The ones from the dealership are thicker, almost like a paste. Very hard to work with. The DR is real automotive paint, flows easy, levels well and is easy to sand and finish if you are so inclined. With a good quality brush, I have been able to repair scrapes about 1/4" x 4". The paint blends well with the original paint.